Guides

Subdivision in The Hills Shire: lot sizes and local rules

How subdivision works in The Hills Shire: the LEP Lot Size Map, the DCP frontage and battle-axe rules, the separate rules for Box Hill and North Kellyville, rural and conservation zones, contributions and bush fire.

Updated 11 min read

Want the answer for your address? Your report checks the zoning, lot size, constraints and costs for your block, in your inbox within 1–2 hours.

Check my block

In The Hills Shire, the minimum lot size for subdivision comes from the Lot Size Map of The Hills Local Environmental Plan 2019 (LEP). Clause 4.1 says a lot created by subdivision is not to be less than the minimum size shown on that map. The Development Control Plan (DCP) then adds frontage, depth, battle-axe and building platform rules. The Hills Shire Council is usually the consent authority.

The Hills has several extra layers to check. Box Hill and North Kellyville sit under state precinct plans, the LEP restricts subdividing dual occupancies, rural and conservation zones have their own rules, and parts of the shire are mapped as bush fire prone. Figures are as at November 2026.

Which planning rules apply in The Hills

The Hills Local Environmental Plan 2019 came into force on 6 December 2019, replacing LEP 2012.

The Hills Development Control Plan 2012 applies to land covered by LEP 2019; council notes that DCP references to LEP 2012 relate to LEP 2019. The subdivision controls are mainly in Part B Section 2 (Residential) and Part B Section 1 (Rural), plus Part D sections for areas such as the Kellyville Rouse Hill Release Area, Balmoral Road Release Area and Box Hill North (Gables).

Box Hill, Box Hill Industrial and North Kellyville are growth centre precincts governed by the State Environmental Planning Policy (Precincts—Central River City) 2021, through the North Kellyville Precinct Plan (Appendix 5) and The Hills Growth Centre Precincts Plan (Appendix 10). They have their own DCPs.

How to find your lot's zone and minimum lot size

  • Council's Interactive Map shows land zoning, lot size, floor space ratio, building height and bush fire prone land for a property.
  • The NSW Planning Portal Spatial Viewer shows the Land Zoning Map and Lot Size Map layers for an address.
  • A section 10.7 planning certificate from council states the zoning and planning controls that apply.

Minimum lot sizes in The Hills

Residential land under the LEP

The minimum lot size is the figure the Lot Size Map shows for your lot. It varies across the shire, so always check the figure for your own lot using one of the tools above.

Clause 4.1A then sets the lot size needed before certain housing can be built, which shapes what a new lot can later hold:

Development (clause 4.1A) Zone Minimum lot area
Dual occupancy (attached) R2, R3 600 m²
Dual occupancy (detached) R2, R3 700 m²
Manor house R3 900 m²
Multi dwelling housing R1, R3, R4, E1 1,800 m²

Clause 4.1B allows one application in Zones R3 and R4 to subdivide land into 3 or more lots of at least 240 m² and build an attached dwelling or dwelling house on each, subject to the conditions in the clause.

DCP frontage, depth and battle-axe rules

Section 2.13 of the DCP's Residential section sets these controls for lots where a dwelling is permissible:

Control (DCP Part B Section 2) Requirement
Minimum frontage, classified road 27 m
Minimum frontage, other roads 18 m (23 m in Zone C4 Environmental Living)
Minimum lot depth 27 m (50 m in Zone C4)
Battle-axe access handle 4 m wide for one lot, 6 m for two or more
Battle-axe lot area At least the LEP minimum, excluding the access corridor
Building platform At least 20 m by 15 m, on relatively flat, stable land

The minimum lot area should also be free of any restricted development area shown on the DCP map sheets. Where the mapped minimum is 700 m², for example, a two-lot battle-axe layout needs more than 1,400 m² once the handle is added. See battle-axe subdivision explained.

Local rules that change the answer in The Hills

Subdividing a dual occupancy

Clause 4.1C of the LEP says that, despite any other provision of the plan, consent must not be granted for a subdivision that would put each dwelling of a dual occupancy on a separate lot. The only exception is a narrow group of older dual occupancies, erected or started before 5 December 2012 under a consent granted before 18 October 1996, and subdivided by strata plan.

The state's low and mid-rise housing provisions in the Housing SEPP may change this in some locations. They set a subdivision standard of at least 225 m² and 6 m width per lot in Zones R1, R2 and R3, in low and mid-rise housing areas: residential land within 800 m walking distance of a nominated station entrance or town centre. The department's list for The Hills includes Bella Vista, Castle Hill, Hills Showground, Kellyville and Norwest stations, and the Baulkham Hills, Castle Hill and Norwest town centres.

The policy does not apply on bush fire prone land, land containing a heritage item, or land in a Transport Oriented Development area mapped under the Housing SEPP. A town planner can advise whether the pathway is open for a specific lot. See also can you subdivide a dual occupancy.

Box Hill and Box Hill Industrial precincts

The Hills Growth Centre Precincts Plan has its own Lot Size Map and a Residential Density Map, and its own clauses on lot sizes for dwelling houses, dual occupancies and small lots. The minimums depend on the density mapped for your land, so check the plan's maps and clauses for your lot, along with the Box Hill and Box Hill Industrial DCP.

North Kellyville precinct

The North Kellyville Precinct Plan works in a similar way, with its own maps and lot size clauses, and the North Kellyville DCP sets the detailed subdivision controls.

Gables

Gables, which the DCP covers as Box Hill North (Part D Section 17), is under the LEP rather than the state precinct plans. A planning proposal for small lot housing on selected undeveloped R3 and R4 sites in Gables (PP-2025-1117) was approved and published on 1 September 2026. Council's exhibition material described lots of 300 m² to 450 m² approved with a building envelope plan. Ask council how the final provision applies to a specific lot.

Rural and conservation zones

Large parts of the shire are zoned rural or conservation, and lot sizes there are far larger than in residential areas. Check the Lot Size Map figure for your own lot.

  • Clause 4.6 limits. Consent cannot be granted under clause 4.6 for a subdivision in Zones RU1, RU2, RU3, RU4, RU6, C2, C3 or C4 that creates 2 or more lots below the minimum, or any lot below 90% of it.
  • Primary production lots. Clause 4.2 allows a smaller lot for primary production, but a dwelling cannot be erected on it.
  • Rural cluster subdivision. Clause 4.1AA allows community title lots of 0.4 to 1 hectare in Zones RU2 and RU6 where the land is at least 10 hectares, there is no more than 1 lot per 2 hectares, and biodiversity tests are met.
  • DCP rural controls. The DCP's Rural section (Part B Section 1) sets its own lot width, building platform and access controls for rural subdivision.

See also subdividing rural land and acreage.

Bush fire prone land

Council describes bush fire prone land as land that "can support a bush fire or is likely to be subject to bush fire attack". The NSW Rural Fire Service says a bush fire safety authority is required for subdivision of bush fire prone land, and residential subdivision is integrated development. Since 1 July 2026, referrals for integrated development go through the NSW Development Coordination Authority, which issues the general terms of approval. See subdividing bush fire prone land in NSW.

Development contributions in The Hills

Council lists 11 current section 7.11 contributions plans. Those covering residential precincts include CP8 Kellyville Rouse Hill, CP12 Balmoral Road, CP13 North Kellyville Precinct, CP15 Box Hill Precinct, CP16 Gables Precinct, CP17 Castle Hill North Precinct, CP18 Bella Vista & Kellyville Station Precincts and CP19 Showground Precinct. The Hills Section 7.12 Contributions Plan applies across the Shire and is charged as a percentage of the estimated cost of development.

Rates differ between plans and are set out in council's Section 7.11 / 7.12 Contribution Rates schedule on its Development Contributions page. Confirm the figure with council's Development Contributions Officer before you pay.

The state's Housing and Productivity Contribution also applies to new residential lots in Greater Sydney: $13,522.84 per new dwelling lot as at 1 October 2026, indexed quarterly. To estimate totals, try our subdivision cost calculator, or see the fees added up for a two-lot split in our Sydney and NSW subdivision cost guide.

How subdivision approval works

You lodge a development application with council through the NSW Planning Portal. Council recommends a pre-lodgement meeting first and publishes a subdivision checklist on its Subdividing Land page. The 2026/27 DA fee for a subdivision without a new public road is $458 plus $53 per additional lot.

After approval, you meet the conditions, obtain a Sydney Water Section 73 Compliance Certificate where required, and apply for the subdivision certificate. NSW Land Registry Services then registers the plan, charging $384.78 plus $384.78 for each lot after the first (2026/27, including GST). For the full process, see how to subdivide land in New South Wales and our guide to the minimum lot size for subdivision in NSW.

Contacting The Hills Shire Council

The Hills Shire Council is at 3 Columbia Court, Norwest NSW 2153, open 8.30am to 4.30pm, Monday to Friday (excluding public holidays). The main phone number is (02) 9843 0555, and the Duty Subdivision Officer can be reached on (02) 9843 0374. The postal address is PO Box 7064, Norwest 2153.

Check your own block

A Subdivision Checker report applies these rules to one address: planning and zoning, heritage, environment, contamination, bushfire, flood, servicing and access, measured lot geometry and concept subdivision design options, plus indicative cost ranges labelled as estimates. It is a starting point, not a substitute for advice from a licensed surveyor or town planner. To see how the checks are set out, view our sample report, or order a report for your address.

Frequently asked questions

What is the minimum lot size for subdivision in The Hills Shire?

It is the figure shown for your land on the Lot Size Map of The Hills Local Environmental Plan 2019 (clause 4.1). The figure varies across the shire, so check your own lot on council's Interactive Map or the NSW Planning Portal Spatial Viewer. Where a dwelling is permissible, the DCP also asks for an 18 m frontage and 27 m depth for residential lots.

Can I subdivide a dual occupancy in The Hills?

Under clause 4.1C of The Hills LEP 2019, consent must not be granted to put each dwelling of a dual occupancy on its own lot, apart from some older approvals subdivided by strata plan. The state's low and mid-rise housing provisions set a subdivision standard of 225 m² and 6 m width per lot in Zones R1, R2 and R3 in mapped areas near some stations and town centres, but they do not apply on bush fire prone land or land with a heritage item. A town planner can advise whether that pathway is open for a specific lot.

Are the rules different in Box Hill, Gables and North Kellyville?

Yes. Box Hill and North Kellyville are governed by precinct plans in the State Environmental Planning Policy (Precincts—Central River City) 2021, not the LEP, and each has its own maps, lot size rules and DCP. Gables is under the LEP. An LEP amendment for small lot housing on selected undeveloped R3 and R4 sites in Gables was published in September 2026, so ask council how it applies to a specific lot.

Can I subdivide my rural block in Kenthurst, Glenorie or Maraylya?

It is not ruled out, but rural lot sizes are far larger than residential ones, so check the Lot Size Map figure for your own lot. Clause 4.6 cannot be used to create 2 or more undersized lots in the rural and conservation zones, or any lot below 90% of the minimum. The DCP's Rural section also sets its own lot width, building platform and access controls.

What contributions apply to a new lot in The Hills?

It depends on the contributions plan for the area. Council has section 7.11 plans for precincts including Kellyville Rouse Hill, Balmoral Road, North Kellyville, Box Hill, Gables, Castle Hill North, Bella Vista and Kellyville Station, and Showground, and a Shire-wide section 7.12 plan charged as a percentage of the estimated cost of development. The state Housing and Productivity Contribution also applies: $13,522.84 per new dwelling lot in Greater Sydney as at 1 October 2026.

Does The Hills Shire Council approve subdivisions?

Yes. In NSW the council is usually the consent authority for an ordinary residential subdivision, which is lodged as a development application through the NSW Planning Portal. Where land is bush fire prone, the NSW Rural Fire Service must also approve it. Council also issues the subdivision certificate before the plan is registered with NSW Land Registry Services.

Sources

This guide is general information only, current at November 2026. Rules, fees and maps change, and every block is different. Speak to a licensed surveyor or town planner about your property.

More subdivision guides

See what applies to your block.

A Subdivision Checker report works through the lot size test, constraints, approval pathway and costs for your address, with every source listed. Full report $199, or a $39 Snapshot.