Guides

Subdivision in the City of Whittlesea: lot sizes and local rules

How subdivision works in the City of Whittlesea: the zone schedules that set (or don't set) a minimum lot size, the green wedge minimums, precinct structure plan levies, open space contributions, local overlays and the council's process and fees.

Updated 13 min read

Want the answer for your address? Your report checks the zoning, lot size, constraints and costs for your block, in your inbox within 1–2 hours.

Check my block

In the City of Whittlesea, there is no single minimum lot size. The Whittlesea Planning Scheme places your land in a zone, and the zone clause and its local schedule decide whether a minimum subdivision area applies. In most established suburbs the answer is that no minimum is set. In the green wedge to the north, minimums run to 40 and 80 hectares. The City of Whittlesea decides the planning permit and certifies the plan.

Whittlesea is also one of Melbourne's main growth councils. The scheme describes the municipality as covering "490 square kilometres", endorsed as a "growth area of metropolitan significance", with its northern parts in "one of Melbourne's green wedge areas". That mix means the rules that matter most depend heavily on where your block is: infill suburbs such as Thomastown, Lalor and Mill Park, growth fronts such as Wollert, Mernda and Donnybrook, or rural land around Whittlesea township. Figures are as at November 2026.

Which planning scheme applies in the City of Whittlesea

The operative scheme is the Whittlesea Planning Scheme, which sits within the state's Victoria Planning Provisions. Victorian schemes have no version number; they are amended continuously. The current local zone schedules were largely set by Amendment C239wsea (27 May 2019), and recent changes include Amendment C287wsea, which applied a permanent Heritage Overlay (HO205) to part of the land at 1470 Plenty Road, Mernda (heritage schedule dated 28 May 2026).

The City says it "has completed its 2026 Planning Scheme Review", which it is required to do every four years and which sets a four-year work program. No replacement scheme is proposed.

How to find your lot's zone and overlays

  • Planning property report (VicPlan). The state's report lists the zone, schedule and overlays for an address. See Planning Victoria's planning property report page.
  • Land Victoria property search. The City's permit page points to this tool to check a lot's zones and overlays.
  • The scheme itself. Once you know your zone (for example NRZ1 or GRZ1), read that zone clause and its Whittlesea schedule.
  • Written advice. The City says you can request written planning advice through a planning property information request, or contact its Planning Department.

Lot sizes for common Whittlesea zones

These figures come from the zone schedules in the Whittlesea Planning Scheme.

Zone (map code) Where it applies Minimum subdivision area
General Residential Zone Schedule 1 (GRZ1) "Whittlesea general residential areas" None set. A vacant lot under 400 m² must contain at least 25% garden area
Neighbourhood Residential Zone Schedule 1 (NRZ1) Suburban residential areas "None specified". The same 25% garden area rule applies to vacant lots under 400 m²
Residential Growth Zone Schedule 1 (RGZ1) "Neighbourhood renewal areas" None set in the schedule
Low Density Residential Zone Mapped LDRZ land "All green wedge land 0.4ha"
Green Wedge Zone, area RZ1 Rural land generally to the north and west 80 hectares
Green Wedge Zone, area RZ2 Mapped rural areas, including land east of Merri Creek 40 hectares
Rural Conservation Zone Schedule 1, areas ER1 to ER6 Including Quarry Hills, Craigieburn Grasslands and the Plenty River headwaters 40 hectares
Rural Conservation Zone Schedule 1, area ER7 Epping North Conservation Area 16 hectares

The 400 m² figure is not a minimum lot size. It only means a vacant lot drawn under 400 m² must show at least 25% garden area, and it does not apply to lots created under an approved precinct structure plan or under a permit for development. Where the Low Density Residential Zone schedule does not specify an area, the zone clause applies: 0.4 hectare per lot without reticulated sewerage, or 0.2 hectare with it. The Township Zone schedule covering the Whittlesea townships does not list a minimum subdivision area.

For how the state rules work, including Clause 56, see how to subdivide land in Victoria, and compare other states in our minimum lot size by state guide.

Local rules that change the answer in Whittlesea

Clause 56 still applies to small subdivisions

"No minimum" does not mean any layout will be approved. In the General Residential Zone, even a two-lot subdivision must meet the objectives of Clauses 56.04-2 (lot area and building envelopes), 56.04-5 (common area), 56.06-8 (lot access) and 56.07-4 (stormwater), and 56.03-5 if the land is in a Neighbourhood Character Overlay. Three to 15 lots picks up most of Clause 56. Rear lots are assessed on lot access; see battle-axe subdivision explained.

Precinct structure plans and the Urban Growth Zone

Much of Whittlesea's growth front is in the Urban Growth Zone, where an approved precinct structure plan (PSP) sets the lot layout rather than a minimum lot size. The City lists plans including the Donnybrook-Woodstock PSP, the English Street Donnybrook PSP and the Mernda Strategy Plan. In the English Street PSP area (UGZ4), lots under 300 m² are tied to the Small Lot Housing Code, and permits issued on or after 31 December 2026 must identify lots under the Code's 2024 version.

Development and infrastructure contributions

Growth-area subdivisions in Whittlesea usually carry levies under a Development Contributions Plan Overlay (DCPO) or Infrastructure Contributions Overlay (ICO). The City says the development infrastructure levy is paid at the subdivision stage, and the community infrastructure levy is a per-dwelling rate payable before a building permit is issued. Its 2026-27 indexed rates include:

Plan (overlay) Development infrastructure levy ($ per hectare) Community infrastructure levy ($ per dwelling)
Epping North LSP DCP (DCPO1) $222,665.50 $700
Quarry Hills DCP (DCPO13) $415,165.10 $1,590
English Street DCP, residential (DCPO15) $417,662.10 $960
Wollert DCP, residential (DCPO16) $555,008.30 $1,590

For the two ICP areas, the City lists a 2026-27 residential monetary levy of $329,552.60 per hectare for Donnybrook-Woodstock (ICO1) and $275,261 per hectare for Shenstone Park (ICO2). The City notes that some rates change quarterly or twice a year, so confirm the current figure with its strategic infrastructure team before relying on it.

A separate drainage plan (DCPO3) charges multi-unit residential development a levy indexed to $2.80 per m² of total site area in 2026-27. In designated growth areas, the state Growth Areas Infrastructure Contribution (GAIC) can also apply; the State Revenue Office says it "applies when land is bought, subdivided or developed".

Public open space

The Whittlesea schedule to Clause 53.01 sets open space percentages only for named areas: for example 8% in the South Morang Local Structure Plan, 3.5% for Quarry Hills, 3.98% for English Street residential land and 4.47% for Wollert residential land. It sets no municipality-wide rate. Elsewhere, including most infill suburbs, the City may require up to 5% under section 18 of the Subdivision Act 1988. A two-lot subdivision is exempt where the City considers further subdivision of each lot unlikely.

Green wedge land

In the Green Wedge Zone a dwelling needs a permit and is limited to one per lot. State law adds a further lock: for metropolitan fringe planning schemes, an amendment that alters subdivision controls on green wedge land to allow more lots, or smaller lots, must be ratified by Parliament. Rezoning green wedge land for small lots is therefore a long, uncertain path, not a permit application.

Heritage, dry stone walls and waterways

  • Heritage Overlay. The schedule runs to HO205 and includes precincts such as the Westgarthtown Heritage Area (HO61), the Mayfield Heritage Precinct in Mernda (HO201) and the Peter Lalor Housing Cooperative Precinct in Lalor (HO184 and HO185). The Heritage Overlay requires a permit to subdivide.
  • Dry stone walls. The City says "Permits are needed to remove stones or alter the walls in any way, even on private property". Several heritage listings, such as HO190 Wattle Park in Wollert, protect the walls themselves. This matters where a new driveway or boundary would cut through a wall.
  • Waterways. Amendment VC278 took effect on 20 January 2026, adding Significant Landscape Overlay schedules SLO3 to SLO11 along the Merri Creek, Darebin Creek, Edgars Creek and Plenty River. Within 50 m of the top of bank, buildings over 6 m high or adding more than 50 m² of floor area need a permit.

Canopy trees

Clause 52.37, updated by Amendment VC315 (24 September 2026), requires a permit to remove an existing canopy tree (at least 5 m tall with an average canopy diameter of at least 4 m) in the residential zones, including the General, Neighbourhood and Residential Growth Zones. There are exemptions, including for a non-boundary tree on a site with an existing dwelling. A tree near the frontage or rear boundary can shape where a new lot and crossover can go.

How subdivision approval works

In Victoria the City of Whittlesea is the decision-maker. The City says all subdivision applications must be lodged by your licensed surveyor through SPEAR, with fees paid at submission. Service authorities including APA Group, AusNet, Melbourne Water and Yarra Valley Water have 28 days to respond. Once the permit is issued and its conditions met, the City certifies the plan and issues the statement of compliance, and Land Services Victoria registers the plan and issues new titles. The City says registration usually takes 5 to 21 business days.

The City lists these fees from 1 July 2026: $1,537.00 for a planning application to subdivide, $233.10 for a VicSmart application, and $203.80 for certification. Some simple subdivisions can use VicSmart, which has a 10 business day prescribed time. Examples include realigning a boundary between two lots and subdividing existing buildings. Since Amendment VC288 (16 October 2025), Clause 59.11 also makes some two-lot residential subdivisions VicSmart, including where one lot is vacant, subject to the clause's conditions. If you subdivide before finishing an approved development, the City may require a section 173 agreement on title.

Yarra Valley Water's 2026-27 New Customer Contribution is $1,113.63 each for water and sewer in its standard region. Higher rates apply in its New Urban Growth Area ($4,332.87 each) and Epping North ($1,131.39 each) regions. The charge applies to each new separately titled connection, and Yarra Valley Water's asset map shows which region applies. For the state fees added up for two and three lots, see our Melbourne and VIC subdivision cost guide, or try our subdivision cost calculator.

Victorian reforms (in progress)

  • Better Decisions Made Faster Act. The Planning Amendment (Better Decisions Made Faster) Act 2026 received Royal Assent on 17 February 2026. Planning Victoria says it "will come into full effect by 29 October 2027", with new regulations, guidelines and planning scheme changes still to be consulted on.
  • Four homes on a lot. On 27 August 2026 Planning Victoria announced that, from October 2026, applications for up to four homes on a lot in residential areas would be assessed in 10 business days. This covers building homes, not subdivision.
  • Subdivision review. The Victorian Government's subdivision page says the Department of Transport and Planning has been reviewing how the subdivision system works, with industry consultation. It aimed to implement reforms in 2025, and no final changes are listed there, so check Planning Victoria before you lodge.

Applications are assessed under the rules in force on the day, so check the scheme before you lodge.

Contacting the City of Whittlesea

The City's Building and Planning team is on 03 9217 2170. The Civic Centre is at 25 Ferres Blvd, South Morang VIC 3752, and the Whittlesea Services Hub is at 63 Church St, Whittlesea VIC 3757. The Subdivisions Team is at subdivisions@whittlesea.vic.gov.au, and general planning enquiries go to buildplan@whittlesea.vic.gov.au. For current development contribution rates, the City's rates schedule lists its strategic infrastructure team on 03 9217 2056 (or email strategic.planning@whittlesea.vic.gov.au).

Check your own block

A Subdivision Checker report applies these rules to one address: planning and zoning, heritage, environment, contamination, bushfire, flood, servicing and access, measured lot geometry and concept subdivision design options, plus indicative cost ranges labelled as estimates. It is a starting point, not a substitute for advice from a licensed surveyor or town planner. To see how the checks are set out, view our sample report, or order a report for your address.

Frequently asked questions

What is the minimum lot size for subdivision in the City of Whittlesea?

It depends on the zone. In the General Residential Zone (Schedule 1) and the Neighbourhood Residential Zone (Schedule 1) the Whittlesea Planning Scheme sets no minimum lot size, although a vacant lot under 400 m² must contain at least 25% garden area. In the Low Density Residential Zone the schedule sets 0.4 hectare for green wedge land. The Green Wedge Zone sets 80 hectares or 40 hectares depending on the area, and the Rural Conservation Zone sets 40 hectares in most areas and 16 hectares in the Epping North Conservation Area.

Who approves a subdivision in Whittlesea?

The City of Whittlesea. It decides the planning permit, certifies the plan of subdivision under the Subdivision Act 1988 and issues the statement of compliance. Your licensed surveyor lodges the application through SPEAR. Service authorities such as Yarra Valley Water, Melbourne Water, AusNet and APA Group are referred the application. Land Services Victoria then registers the plan and issues the new titles.

Do I have to pay development contributions to subdivide in Whittlesea?

In the growth areas, usually yes. Land in a Development Contributions Plan Overlay or Infrastructure Contributions Overlay pays a levy per hectare, plus a community infrastructure levy per dwelling under most DCPs. For 2026-27 the City lists, for example, $555,008.30 per hectare and $1,590 per dwelling for the Wollert DCP residential area. Ask the City's strategic infrastructure team for the current rate, as some rates change quarterly or half-yearly.

How much public open space contribution applies in Whittlesea?

The Whittlesea schedule to Clause 53.01 sets percentages only for named structure plan areas, such as 4.47% for Wollert PSP residential land, 3.5% for Quarry Hills and 8% for the South Morang Local Structure Plan. It sets no municipality-wide rate, so elsewhere the City may require up to 5% under section 18 of the Subdivision Act 1988. A two-lot subdivision is exempt where the City considers further subdivision of each lot unlikely.

Can I subdivide land in Whittlesea's green wedge?

Large rural lots are not ruled out, but small lots are very unlikely. The Green Wedge Zone schedule sets minimums of 80 hectares and 40 hectares, and the Rural Conservation Zone sets 40 hectares in most areas. State law also requires Parliament to ratify any amendment to a metropolitan fringe planning scheme that would allow more or smaller lots on green wedge land. A licensed surveyor or town planner can advise on a specific lot.

Are subdivision rules in Victoria changing?

Some changes are under way. The Planning Amendment (Better Decisions Made Faster) Act 2026 received Royal Assent on 17 February 2026 and will come into full effect by 29 October 2027, with supporting regulations and guidelines still to be consulted on. The Department of Transport and Planning has also been reviewing the subdivision system. Applications are assessed under the rules in force now.

Sources

This guide is general information only, current at November 2026. Rules, fees and maps change, and every block is different. Speak to a licensed surveyor or town planner about your property.

More subdivision guides

See what applies to your block.

A Subdivision Checker report works through the lot size test, constraints, approval pathway and costs for your address, with every source listed. Full report $199, or a $39 Snapshot.