Guides

Subdivision in Logan City Council: lot sizes and local rules

How subdivision works in Logan: the Logan Planning Scheme 2015 version in force, minimum lot sizes and frontages by precinct, rear lot and frontage diversity rules, flood mapping, 2026–27 fees, the new infrastructure charges resolution and plan sealing.

Updated 11 min read

Want the answer for your address? Your report checks the zoning, lot size, constraints and costs for your block, in your inbox within 1–2 hours.

Check my block

In Logan, subdivision is called reconfiguring a lot, and the rules come from the Logan Planning Scheme 2015. Your zone and precinct set the minimum lot size, the scheme's Reconfiguring a lot code sets frontages and rear lot rules, and council's assessment criteria decide whether the application is code assessable or impact assessable. Logan City Council assesses the application.

Logan's lot sizes have been stable since early 2023, but other things have moved. Risk-based flood mapping has applied since late 2023 (under a replacement TLPI since March 2025), a new infrastructure charges resolution took effect on 9 November 2026, and council is drafting a replacement scheme. This guide sets out the local rules. Figures are as at November 2026.

Which version of the planning scheme applies

Council's planning scheme page lists Logan Planning Scheme 2015 V9.2 as the current version, which "commenced on 1 July 2025". It is read together with Temporary Local Planning Instrument (TLPI) No. 1/2024, which changes the flood provisions (see below). Council's amendments register shows that v9.2 was a minor rezoning of 32 properties council bought under the Voluntary Home Buy Back Program.

The change that matters most for subdivision came earlier. The Housing and Lot Diversity Amendment was adopted on 25 January 2023 and commenced on 6 February 2023 as Version 9.0. Council's summary of changes says it "removes the use of 'average lot size' entirely", revised minimum lot sizes in some residential precincts, and adjusted frontage requirements to achieve "a noticeable variety of lot widths" in developments of 10 or more lots.

Inside the scheme, the rules you need are:

  • Part 5 (Tables of assessment), which sets when reconfiguring a lot is code or impact assessable.
  • 9.4.6 Reconfiguring a lot code, which sets lot sizes, frontages and rear lot access in Tables 9.4.6.3.2 to 9.4.6.3.5.
  • The zone, local plan and overlay codes that apply to your site.

Yarrabilba and Greater Flagstone are different. Council says "The Logan Planning Scheme does not apply to the priority development areas of Yarrabilba and Greater Flagstone", and that development there is managed by Economic Development Queensland. The figures below do not apply in those areas.

How to find your zone, precinct and overlays

Council's reconfiguring a lot page points to the Property Report in the Logan PD Hub. Council says the report shows the zones, precincts, local plans and overlays that apply to a property, including how much of the property each overlay affects.

The precinct is the key detail. Logan's Low density residential zone alone has six precincts, and the minimum lot size changes with each one. Local plans, such as Loganholme and Loganlea, add their own precincts.

Minimum lot sizes and frontages

Table 9.4.6.3.2 of the Reconfiguring a lot code (v9.2) sets these figures for the residential precincts:

Zone and precinct Minimum lot size Minimum frontage (normal / cul-de-sac / corner) Rear lots
Low density residential, Small lot 300 m² 10 m / 6 m / 12 m Not created
Low density residential, Suburban 400 m² 12.5 m / 10 m / 15 m Allowed, with extra requirements
Low density residential, Village 500 m² 15 m / 10 m / 18 m Allowed, with extra requirements
Low density residential, Large suburban 1,000 m² 20 m / 10 m / 22 m Allowed, with extra requirements
Low density residential, Small acreage 2,000 m² 20 m / 15 m / 30 m Allowed, with extra requirements
Low density residential, Acreage 4,000 m² 40 m / 20 m / 40 m Not created
Low-medium density residential, Townhouse 500 m² 20 m / no minimum / 30 m Not created
Low-medium density residential, Apartment 800 m² 20 m / no minimum / 30 m Not created

Council's page lists further minimums for other zones, including 1,200 m² in all Medium density residential precincts, 5,000 m² in the Rural residential zone's Park residential precinct, 20 hectares in the Emerging community zone and 100 hectares in the Rural zone. The Loganholme and Loganlea local plans set their own precinct figures, from 400 m² in Loganholme's Suburban residential precinct up to 1,200 m² in its Residential core precinct.

For how these compare with Brisbane and Moreton Bay, see the minimum lot size for subdivision in Queensland.

When an application becomes impact assessable

Council's page says "Reconfiguring a lot is subject to code assessment" unless the proposal meets the impact assessment criteria for its zone. In the Low density residential zone, those criteria include:

  • Small lot precinct: a lot under 300 m².
  • Suburban precinct: a lot under 400 m², or a rear lot under 500 m².
  • Village precinct: a lot under 500 m², or a rear lot under 600 m².
  • Large suburban, Small acreage and Acreage precincts: a lot under 1,000 m², 2,000 m² or 4,000 m² respectively.

In the Low-medium density residential zone, a lot under 500 m² (Townhouse) or 800 m² (Apartment) triggers impact assessment. Council notes these residential criteria do not apply to subdividing an approved multiple dwelling.

A smaller lot is not ruled out, but impact assessment means public notification. Council's development applications page says the notification period "must last for at least 15 business days", with a sign on the land, letters to adjoining owners and a local newspaper notice.

Rear lots and frontage diversity

Table 9.4.6.3.4 sets extra requirements for rear (battle-axe) lots. In the Suburban precinct, a rear lot needs 500 m² clear of the access strip, and the access strip can be up to 35 m long. The Village precinct requires 600 m² with a strip of up to 50 m, and the Large suburban precinct 1,000 m² with up to 60 m. Where the access serves one dwelling, the code sets a 4 m driveway reserve with 3 m of pavement, widening to a 5.5 m reserve (3 m pavement) with passing bays for two to four dwellings. For how rear lots work generally, see battle-axe subdivision explained.

Frontage diversity applies "Where creating 10 or more lots" in the Small lot, Suburban or Village precincts. Under Table 9.4.6.3.5, no more than 70% of the lots can sit in the narrowest frontage band (for example 12.5 m to 14.99 m in the Suburban precinct) and at least 30% must be wider (15 m or more in the Suburban precinct). AO9.2 adds that no more than three adjoining lots may have the same frontage. A typical one-into-two subdivision is below that threshold.

Overlays: flood, bushfire and more

Part 1 of the scheme lists its mapping overlays. Those that most often affect a residential subdivision include the Flood hazard, Bushfire hazard, Biodiversity areas, Landslide hazard and steep slope area, Waterway corridors and wetlands, Heritage and Acid sulfate soils overlays.

Flood. TLPI No. 1/2024, "Risk-Based Flood Mapping and Policy for the City of Logan", commenced on 6 March 2025 and suspends specific flood provisions of the scheme. Council says it "Expires on 6 March 2027 unless repealed sooner." Council's risk-based flood mapping fact sheet groups land into high, moderate and low flood risk areas, plus flood investigation areas where the risk is not yet known. In high risk areas, it says "New residential, industrial or commercial development is generally not supported". The TLPI does not apply in the Yarrabilba and Greater Flagstone priority development areas. To see the flood risk for a property, council points to the Logan Flood Portal and its property flood report.

If an overlay covers part of your block, the new boundaries and building areas may need to avoid it.

How the application works

You lodge a development application with council. Council offers pre-lodgement advice, and its 2026–27 fees register lists no charge for a pre-lodgement meeting. Council also publishes a "Checklist of subdivision project costs" spreadsheet to help estimate the total cost. For an overall estimate, try our subdivision cost calculator.

Council's Register of Cost-Recovery Fees 2026/27 lists:

Application Fee
Reconfiguration of lots, code assessable $5,060 base fee + $1,055 per lot
Reconfiguration of lots, impact assessable $5,818 base fee + $1,194 per lot
Boundary realignment $5,440
RiskSmart applications 75% of the scheduled application fee

Council says application fees are "payable when the application or request is lodged". Engineering works may also need operational works approval. For the state process, timeframes and appeal rights, see how to subdivide land in Queensland.

Infrastructure charges, water and sewer

The Logan Charges Resolution (No. 13) 2026 was adopted on 14 October 2026 and took effect on 9 November 2026. Schedule 3, Table 1 sets the adopted charge for reconfiguring a lot at $38,029.25 for each lot. The charge covers council's trunk water supply, sewerage, stormwater quantity, movement (transport), parks and land for community facilities networks.

The resolution recognises credits for some existing demand, such as a lawful use already on the premises, or a charge previously paid for the reconfiguration that created the lot. Council's infrastructure charges team (ICUgeneral@logan.qld.gov.au) can help with estimates. An Infrastructure Charges Notice is usually issued with the development permit, and council says charges for a subdivision are payable "before approval of the survey plan for a subdivision".

In Logan, water and sewerage are run by council itself, through Logan Water. Its Water Development Services team assesses the water and sewerage aspects of development applications, and connecting to or altering water or wastewater infrastructure needs a Private Works application with an approved design plan.

Plan sealing and titles

Once the works are done, your surveyor's plan is lodged with council for approval, known as plan sealing. Council says this can only happen once "all development conditions have been met", with infrastructure charges and all rates paid. It gives a preliminary response within 7 business days and, if the works and documents match the approvals, endorses the plan within 20 business days. ExpressSeal lets applications be fast-tracked using accredited consultants. The 2026–27 survey plan sealing fee is $927 per lot, which does not apply to balance lots, lots transferred to council or access restriction strips. Council notes that plan sealing must be done before the plan is registered with the state's titles registry. For that step, see how to subdivide land in Queensland.

Changes on the way

Logan Plan is council's draft replacement planning scheme, which council says aims to "provide more housing choice". Consultation ran from 1 September to 31 October 2025. Council's timeline shows submissions being worked through in 2026–2027, a possible second round of consultation in 2028, and council adopting Logan Plan in 2029–2030, noting state steps "may result in timeframes being extended". It is a proposal only. Until it commences, the Logan Planning Scheme 2015 lot sizes apply.

Contacting Logan City Council

Council's main number is 07 3412 3412, and planning and development information is on 07 3412 5269. Water development services are on 07 3412 4004. The customer service centre is at 150 Wembley Road, Logan Central, open 8.00am to 5.00pm on weekdays, and the postal address is PO Box 3226, Logan City DC QLD 4114. Pre-lodgement requests go to prelodgement@logan.qld.gov.au.

Check your own block

A Subdivision Checker report applies these rules to one address: planning and zoning, heritage, environment, contamination, bushfire, flood, servicing and access, measured lot geometry and concept subdivision design options, plus indicative cost ranges labelled as estimates. It is a starting point, not a substitute for advice from a licensed surveyor or town planner. To see how the checks are set out, view our sample report, or order a report for your address.

Frequently asked questions

What is the minimum lot size for subdivision in Logan?

It depends on the zone and precinct under the Logan Planning Scheme 2015. In the Low density residential zone, council lists 300 m² in the Small lot precinct, 400 m² in the Suburban precinct, 500 m² in the Village precinct, 1,000 m² in the Large suburban precinct, 2,000 m² in the Small acreage precinct and 4,000 m² in the Acreage precinct. Each precinct also has a minimum frontage, such as 12.5 m for a normal lot in the Suburban precinct.

Can I subdivide in Logan?

It depends on your zone and precinct, whether the proposed lots meet the lot size and frontage rules in the Reconfiguring a lot code, and on overlays such as flood, bushfire and biodiversity. Reconfiguring a lot is code assessable unless it meets council's impact assessment criteria, such as a lot below the precinct minimum. It is not ruled out on a smaller block, but the process is longer and less certain. A licensed surveyor or town planner can advise on a specific lot.

Are rear lots allowed in Logan?

In some precincts. Rear lots are not created in the Small lot and Acreage precincts of the Low density residential zone, or in the Low-medium density residential zone. In the Suburban precinct a rear lot needs at least 500 m² clear of the access strip, and a rear lot under 500 m² makes the application impact assessable. In the Village precinct the figure is 600 m².

What infrastructure charges apply to a Logan subdivision?

Under the Logan Charges Resolution (No. 13) 2026, which took effect on 9 November 2026, the adopted charge for reconfiguring a lot is $38,029.25 for each lot. Credits can apply for existing lawful demand on the premises. Council says charges for a subdivision are payable before it approves the survey plan.

What are council's fees to subdivide in Logan?

Council's 2026–27 register lists $5,060 plus $1,055 per lot for a code assessable reconfiguration of lots, and $5,818 plus $1,194 per lot for an impact assessable one. Survey plan sealing is $927 per lot. Infrastructure charges, surveying, engineering and connection costs are on top of these fees.

Does the Logan Planning Scheme apply in Yarrabilba and Greater Flagstone?

No. Council says the Logan Planning Scheme does not apply to the priority development areas of Yarrabilba and Greater Flagstone, and that development there is managed by Economic Development Queensland. The lot sizes in this guide do not apply in those areas.

Sources

This guide is general information only, current at November 2026. Rules, fees and maps change, and every block is different. Speak to a licensed surveyor or town planner about your property.

More subdivision guides

See what applies to your block.

A Subdivision Checker report works through the lot size test, constraints, approval pathway and costs for your address, with every source listed. Full report $199, or a $39 Snapshot.