Free tool
Subdivision cost calculator
Pick your state and number of lots to add up the official government fees and charges for a small residential subdivision: application, sealing or certification, titles and, where published, water and sewer charges. Figures are 2026–27 fees, current at October 2026.
| WAPC application fee | $4,007 |
|---|---|
| WAPC endorsement of the deposited plan | $735 |
| Council clearance (up to)Up to $73 per lot for 5 lots or fewer. | $146 |
| Landgate plan lodgement | $558 |
| Landgate new titles | $241.50 |
| Water Corporation water contributionPer new lot; assumes the existing lot is already connected. | $2,756 |
| Water Corporation wastewater contributionPer new lot; assumes the existing lot is already connected. | $5,121 |
| Estimated official fees and charges | $13,564.50 |
Will your block qualify? A $39 Snapshot checks your address: zoning, minimum lot size, measured lot dimensions and key constraints. The full report adds the costs for your block.
Check my block – $39Also check (not included above)
- Public open space: the WAPC sets 10% of the gross subdivisible area (land or cash in lieu), but infill subdivision can default to 0% until 18 December 2027 unless the local planning scheme requires it.
- Drainage charge of $41 for green-title lots in urban declared drainage areas of metropolitan Perth.
Costs you’ll need quotes for
- Licensed or registered surveyor: feature survey, subdivision plan and pegging
- Town planner, if the application needs one
- Engineering and service connection works (water, sewer, power, stormwater, crossover)
- Demolition or removal of buildings in the way
- Conveyancing and legal work for easements and the new titles
- Bushfire, flood, heritage or environmental reports where the site needs them
These usually make up most of the total and vary widely by site, so we don’t estimate them here.
Get the costs that apply to your address.
A Subdivision Checker report lists the fees, charges and constraints that apply to your block, with indicative cost ranges labelled as estimates. In your inbox within 1–2 hours.
How this calculator works
It totals only government fees and charges that have a clear published rule per plan or per lot, taken from our guide to how much it costs to subdivide land in Australia, where every figure is sourced. It assumes a simple subdivision with no new public road, and that the existing lot is already connected to water and sewer. Fees change every year, and in Queensland and Tasmania each council sets its own, so treat the total as an estimate and confirm with your council, surveyor or town planner.
Survey, design, planning and works costs are quoted for each site and usually make up most of the total, so the calculator lists them rather than guessing. For the rules that decide whether a block can be split, see Can I subdivide my block? and minimum lot size by state.
General information only, current at October 2026. Not legal, planning, surveying, financial or valuation advice.
See what applies to your block.
A Subdivision Checker report works through the lot size test, constraints, approval pathway and costs for your address, with every source listed. Full report $199, or a $39 Snapshot.
