Guides

Subdivision in the City of Casey: lot sizes and local rules

How subdivision works in the City of Casey: the zone schedules that set or omit a minimum lot size, the council's approach to vacant lots, growth area precinct structure plans, development and infrastructure contribution levies, overlays and fees.

Updated 13 min read

Want the answer for your address? Your report checks the zoning, lot size, constraints and costs for your block, in your inbox within 1–2 hours.

Check my block

In the City of Casey, whether a block can be split depends first on its zone and the schedule to that zone in the Casey Planning Scheme. Some Casey schedules set a minimum lot size and many set none, in which case lot size is tested against Clause 56 (Residential Subdivision). The City of Casey is the responsible authority: it decides the planning permit, certifies the plan and issues the statement of compliance.

Casey adds its own layer: a 600 m² minimum in the Berwick Township Grid, a stated reluctance to support subdivisions that create a vacant lot, and large growth areas under precinct structure plans that carry contribution levies. Figures are as at November 2026.

Which planning scheme applies in the City of Casey

The operative scheme is the Casey Planning Scheme, which is made up of the state-wide Victoria Planning Provisions plus Casey's own schedules and local policies. It is amended often: the General Residential Zone clause in Casey's scheme carries state amendments as recent as VC319, dated 22 October 2026.

Casey's local housing policy, Clause 16.01-1L Housing supply in Casey (Amendment C284case, 19 June 2025), encourages "diverse housing and lot sizes" within walking distance of activity centres and public transport, in the substantial and incremental housing change areas shown in the scheme's residential settlement framework plan.

How to find your lot's zone and overlays

  • Planning property report. Download it for your address from VicPlan. It lists the zone, schedule number (for example GRZ1 or NRZ2) and every overlay.
  • The zone schedule. Read the schedule for your zone in the Casey Planning Scheme. That is where any minimum lot size sits.
  • Your title. The City says some Casey subdivisions place a building envelope on title, and it does not keep title records. A copy of the title, any restrictive covenant and any section 173 agreement can come from LANDATA.

Minimum lot sizes in Casey's zones

These figures are from the Casey zone schedules we checked in November 2026.

Zone and schedule Area Minimum lot size for subdivision
General Residential Zone, Schedule 1 (GRZ1) General residential areas None specified
General Residential Zone, Schedule 2 (GRZ2) Areas close to activity centres, train stations and strategic bus routes None specified
Residential Growth Zone, Schedule 1 (RGZ1) – None specified
Neighbourhood Residential Zone, Schedule 1 (NRZ1) Berwick Township Grid 600 m²
Neighbourhood Residential Zone, Schedule 2 (NRZ2) Minimal Change Areas None specified
Low Density Residential Zone, Schedule 1 (LDRZ1) All land 0.4 hectare
Low Density Residential Zone, Schedule 2 (LDRZ2) All land 0.4 hectare without reticulated sewerage; 0.2 hectare with it
Green Wedge Zone, Schedule 1 / Schedule 2 All land 2 hectares / 4 hectares
Farming Zone, Schedule 1 / Schedule 2 All land 12 hectares / 40 hectares

"None specified" does not mean any lot size will be approved. In the General and Neighbourhood Residential Zones, a vacant lot under 400 m² must contain at least 25% garden area, and every residential subdivision must address the Clause 56 standards, including Clause 56.04-2 on lot area and building envelopes. The City's guidance is that the minimum lot size "will be determined by the layout of the development that has been approved for the site". For how these rules work state-wide, see how to subdivide land in Victoria and our minimum lot size by state guide.

Local rules that change the answer in Casey

Vacant lots and the development-first approach

The City's subdivision steps page says: "A subdivision which proposes to create a vacant lot will generally not be supported by the council." It prefers to know how a site will be developed, so in most cases you apply for a permit for the development (such as a second dwelling) first, then subdivide. Where existing buildings are being subdivided, a planning permit may not be needed.

State rules have also moved. Since Amendment VC288 (16 October 2025), the residential zones include a VicSmart class for a two-lot residential subdivision that creates at least one vacant lot, assessed against Clause 59.11. It does not apply if the land is in an Environmental Audit Overlay, a Neighbourhood Character Overlay or a designated bushfire prone area, or is 0.4 hectare or more and contains native vegetation. There are also VicSmart classes where a permit for two dwellings has been issued, or where each lot contains an existing building. A licensed surveyor or town planner can advise which pathway suits a specific lot.

Berwick Township Grid

Schedule 1 to the Neighbourhood Residential Zone covers the Berwick Township Grid and states: "The minimum lot size for subdivision is 600 square metres." Two lots would therefore generally need at least 1,200 m², before any access leg is considered. For rear lots, see battle-axe subdivision explained.

Growth areas and precinct structure plans

The City's growth area precinct structure plans (PSPs) include Berwick Waterways, Botanic Ridge, Cardinia Creek South, Clyde Creek, Clyde North, Cranbourne East, Cranbourne West, Minta Farm and Thompsons Road. Most of this land is in the Urban Growth Zone. Before a PSP applies, Clause 37.07 says "Each lot must be at least 40 hectares", with limited exceptions. Once a PSP applies, a subdivision permit must "Be generally in accordance with the precinct structure plan".

The Croskell PSP was approved and gazetted on 13 March 2026 under Amendment C296case. In growth area precincts, the updated Small Lot Housing Code allows homes on lots under 100 m² without a permit where its standards are met, and lot types are nominated on the plan of subdivision before certification. The previous code remains in effect until the end of 2026.

Development and infrastructure contributions

Most Casey growth areas carry a levy under a Development Contributions Plan Overlay (DCPO) or Infrastructure Contributions Overlay (ICO). The City's published rates include:

Plan Residential rate (as published) Community infrastructure levy
Berwick Waterways DCP $908,481.07 per ha $1,200 per lot/unit
Botanic Ridge DCP $490,585.39 per ha $1,590 per lot/unit
Clyde North DCP $661,711.83 per ha $1,590 per lot/unit
Cranbourne East DCP $372,606.50 per ha $1,290 per dwelling
Fountain Gate/Narre Warren DCP $1,237.87 (Area 1) or $1,618.84 (Area 2) per lot/unit –
Cardinia Creek South, Minta Farm and Croskell ICPs (2026-27) $119,682 per ha community and recreation, plus $155,579 per ha transport Does not apply

DCP rates are as at 1 October 2026; ICP rates apply from 1 July 2026 to 30 June 2027, with Minta Farm and Croskell supplementary levies listed as "TBA". The City says a contribution must be "paid not more than 21 days prior to the issue of a Statement of Compliance", and that rates should be read with the relevant schedule in the scheme. Levy questions go to levies@casey.vic.gov.au.

Public open space

The schedule to Clause 53.01 sets public open space contributions by mapped area, ranging from 1.5% to 20%, for example 4.04% in the Cranbourne North Stage 2 PSP area and 4.01% in Clyde Creek. The City says a contribution can be land, a cash payment based on site value, or both. The City notes that most two-lot subdivisions are exempt where it considers further subdivision of each lot unlikely.

Heritage Overlay

Casey's Heritage Overlay schedule includes places such as the former Berwick Post Office and Courthouse (HO29), the Berwick Inn (HO30), the High Street Avenue of Honour (HO198), the former Cranbourne Shire Offices complex (HO17) and precincts including the Fountain Gate Estate Precinct (HO162) and Tooradin Foreshore Reserve Precinct (HO161). The Heritage Overlay requires a permit to subdivide.

Environmental, landscape and flood overlays

  • Environmental Significance Overlay. Clause 42.01 requires a permit to subdivide land unless a schedule says otherwise. Casey's schedules cover the Western Port coastal environs (ESO1) and the Cranbourne Gardens (ESO2 and ESO3), and none of them exempts subdivision.
  • Significant Landscape Overlay, Schedule 1 (Casey Foothills). Its decision guidelines focus on development, earthworks, slope, visibility and vegetation in the hilly foothills.
  • Flooding. Casey contains Urban Floodway Zone and Land Subject to Inundation Overlay land, and Melbourne Water is among the authorities the City refers subdivisions to.

Development Plan Overlay

Some Casey land is in a Development Plan Overlay; your planning property report will show it. Under Clause 43.04, a permit to subdivide generally cannot be granted until a development plan has been prepared, unless the schedule says otherwise, and the permit must be "generally in accordance with the development plan".

How subdivision approval works

You apply to the City of Casey. Its application page says a current title "no older than 30 days", any covenant or section 173 agreement, plans and the fee are required, or the application is "automatically rejected". Subdivision plans must be prepared by a licensed land surveyor. The City refers most applications to service authorities including South East Water, Melbourne Water and the electricity, gas and telecommunications providers, and advertising to neighbours may be required. After the permit, engineering plans are lodged, conditions are met, the City issues a statement of compliance, and the plan is lodged through SPEAR for registration with Land Services Victoria.

Statutory fees for 2026-27 (fee unit $17.27): a permit to subdivide into two lots is $1,537.00, a VicSmart subdivision is $233.10, and certification plus statement of compliance is $203.80. Checking engineering plans can be charged at up to 0.75% of the estimated construction cost, and supervision of works up to 2.5%. Our Melbourne and VIC subdivision cost guide adds up the state fees for two and three lots.

Casey's own 2026/2027 fees include $305 for an intermediate pre-application meeting ($816 advanced), $268 per sign on site and $9 per notice for 1 to 20 notices when advertising is required, $265 for development engineering plan checking, and $354 for an inspection before statement of compliance (first assessment free).

Water. South East Water's 2026-27 Pricing Handbook lists New Customer Contributions per lot of $1,112.49 for water and $1,306.81 for sewer in the "Casey Area", plus $2,951.64 for recycled water where supplied, and $1,112.49 for each of water and sewer in "Other Areas". Ask South East Water which applies to your lot. For a fuller estimate, try our subdivision cost calculator.

Victorian reforms and Casey amendments

  • In force: Amendment VC288 (16 October 2025) introduced Clause 59.11, the VicSmart two-lot residential subdivision class described above.
  • Legislated, not yet fully in effect: the Planning Amendment (Better Decisions Made Faster) Act 2026 received Royal Assent on 17 February 2026. Planning Victoria says it will set up permit pathways scaled to complexity and come into full effect by 29 October 2027.
  • Proposed, not approved: Amendment C295case (Casey Fields South Employment and Devon Meadows PSP) has been submitted for Ministerial consideration. Amendment C306case would add land at 95 and 125 McCormacks Road, Clyde North, to the Cardinia Creek South PSP (submissions closed 12 April 2026). Amendment C300case would rezone land at Cyril Beechey Lane, Cranbourne, to General Residential Zone, and awaits a Council decision after a panel report dated 26 June 2026.

Contacting the City of Casey

The City can be reached on (03) 9705 5200 or caseycc@casey.vic.gov.au, or in person at Bunjil Place, 2 Patrick Northeast Drive, Narre Warren, Monday to Friday, 9.00am to 4.00pm. Postal address: PO Box 1000, Narre Warren VIC 3805. The City's subdivision pages also offer a "Request a call from a planner" form, with a planner to contact you within two business days.

Check your own block

A Subdivision Checker report applies these rules to one address: planning and zoning, heritage, environment, contamination, bushfire, flood, servicing and access, measured lot geometry and concept subdivision design options, plus indicative cost ranges labelled as estimates. It is a starting point, not a substitute for advice from a licensed surveyor or town planner. To see how the checks are set out, view our sample report, or order a report for your address.

Frequently asked questions

What is the minimum lot size for subdivision in the City of Casey?

It depends on the zone and its schedule in the Casey Planning Scheme. The General Residential Zone sets no minimum lot size, and neither does Schedule 2 to the Neighbourhood Residential Zone (Minimal Change Areas). Schedule 1 to the Neighbourhood Residential Zone (Berwick Township Grid) sets a 600 m² minimum. The Low Density Residential Zone schedules set 0.4 hectare, or 0.2 hectare where Schedule 2 applies and the lot is connected to reticulated sewerage. Green Wedge and Farming Zone schedules set 2 to 40 hectares. Every subdivision must also address Clause 56.

Will the City of Casey approve a subdivision that creates a vacant lot?

The City's own subdivision steps page says a subdivision which proposes to create a vacant lot "will generally not be supported", and that it prefers a permit for the development to come first. Since Amendment VC288 on 16 October 2025, however, a two-lot residential subdivision that creates a vacant lot can be a VicSmart application, subject to conditions, including that the land is not in an Environmental Audit Overlay, a Neighbourhood Character Overlay or a designated bushfire prone area. A licensed surveyor or town planner can advise on the best pathway for a specific lot.

Can I subdivide in the Berwick Township Grid?

It is not ruled out, but Schedule 1 to the Neighbourhood Residential Zone, which covers the Berwick Township Grid, says the minimum lot size for subdivision is 600 square metres. Two lots would therefore generally need at least 1,200 m² before any access leg or other constraint is considered. Several Berwick places are also in the Heritage Overlay, which requires a permit to subdivide.

What contributions apply to subdivision in Casey's growth areas?

Most growth areas are covered by a development contributions plan or an infrastructure contributions plan. The City publishes current rates. For example, at 1 October 2026 the Clyde North DCP residential rate was $661,711.83 per hectare plus a community infrastructure levy of $1,590 per lot or unit, and the 2026-27 Cardinia Creek South ICP residential levies were $119,682 per hectare for community and recreation and $155,579 per hectare for transport. Levies must be paid not more than 21 days before a statement of compliance is issued.

Does the City of Casey approve subdivisions?

Yes. In Victoria the council is the responsible authority for the planning permit, and it also certifies the plan of subdivision and issues the statement of compliance. Service authorities such as South East Water and Melbourne Water are referred the application. Land Services Victoria then registers the plan and issues the new titles. For 2026-27 the statutory permit fee for a two-lot subdivision is $1,537.00, or $233.10 for a VicSmart subdivision.

Are subdivision rules in Casey changing?

Some changes are under way. The Planning Amendment (Better Decisions Made Faster) Act 2026 received Royal Assent on 17 February 2026 and is to come into full effect by 29 October 2027, with permit pathways scaled to complexity. The updated Small Lot Housing Code applies in growth area precincts, with the previous code remaining in effect until the end of 2026. Locally, Amendment C295case (Casey Fields South Employment and Devon Meadows) has been submitted for Ministerial consideration, and C306case (Cardinia Creek South) and C300case (Cranbourne) are proposals that are not yet approved.

Sources

This guide is general information only, current at November 2026. Rules, fees and maps change, and every block is different. Speak to a licensed surveyor or town planner about your property.

More subdivision guides

See what applies to your block.

A Subdivision Checker report works through the lot size test, constraints, approval pathway and costs for your address, with every source listed. Full report $199, or a $39 Snapshot.