In Blacktown City, the lot size you need to subdivide depends first on where your land is. In the established suburbs, such as Blacktown, Seven Hills, Doonside and Mount Druitt, Blacktown Local Environmental Plan 2015 (LEP) sets the minimum on its Lot Size Map, and Part C of Blacktown Development Control Plan 2015 (DCP) sets lot width, depth and battle-axe rules. In the newer suburbs of the North West Growth Area, such as Marsden Park, Schofields and Riverstone, a state planning policy and a separate Growth Centre DCP apply instead.
Blacktown's LEP also restricts splitting a dual occupancy, and its contributions plans differ from one area to the next. This guide sets out those local rules alongside the state ones. Figures are as at November 2026.
Which planning rules apply in Blacktown
Established areas. Blacktown LEP 2015 is the principal planning instrument. Council says Blacktown DCP 2015 "is consistent with" the LEP and applies only to land covered by it. Part C of the DCP covers development in the residential areas, and later parts cover specific estates such as Stonecutters Ridge, The Ponds and the Ashlar Precinct.
North West Growth Area. Council says 12 of the Growth Area's 16 precincts are in Blacktown City, and that controls are set by State Environmental Planning Policy (Precincts—Central River City) 2021 and State Environmental Planning Policy (Precincts—Western Parkland City) 2021. Development applications there are assessed against the Blacktown City Council Growth Centre Precincts DCP 2010, in the version amended in October 2025.
Council also lists separate precinct plans for some other areas, such as Eastern Creek and Huntingwood, so check which controls apply to your land before relying on the figures below.
How to find your lot's zone and minimum lot size
- NSW Planning Portal Spatial Viewer. Search your address and, under Principal Planning Layers, turn on the Land Zoning Map and the Lot Size Map.
- The LEP text. Read Part 4 of Blacktown LEP 2015 on the NSW legislation website for the clauses that vary the map.
- A section 10.7 planning certificate. Council's certificate states the zoning, planning controls and hazards such as bush fire prone land that apply. The state-set fee in 2026/27 is $74, plus $111 if it includes section 10.7(5) advice.
The Lot Size Map figure varies across the city, so two R2 blocks a few streets apart can have different minimums. Council's planning staff can confirm the controls for a specific lot.
Lot size rules in Blacktown LEP 2015
| Rule | What it says | Source |
|---|---|---|
| Minimum lot size | Each lot created by subdivision is not to be less than the minimum shown on the Lot Size Map for that land | LEP cl 4.1 |
| Building a dual occupancy (R2) | Sets a minimum lot area for building a dual occupancy in Zone R2. Council's DCP refers to 500 m² for an attached dual occupancy; check the current LEP for the figures that apply | LEP cl 4.1B; DCP Part C s 4.3.1 |
| Subdividing a detached dual occupancy | Restricted, with two exceptions (see below) | LEP cl 4.1C |
For how these clauses compare with other Sydney councils, see our guide to the minimum lot size for subdivision in NSW.
Local rules that change the answer in Blacktown
Dual occupancies: building one is not the same as splitting it
Dual occupancies are permitted with consent in the R2 zone across NSW. Clause 4.1C of Blacktown's LEP was replaced in 2022 (Amendments No 31 and 32). As amended, it says consent must not be granted to subdivide land on which a detached dual occupancy was lawfully erected to create separate titles for each dwelling, unless:
- Lots that meet the map. Each of the 2 resulting lots is not less than the minimum shown for the land on the Lot Size Map; or
- Corner lots. The land is a corner lot on which each dwelling fronts a different road and each resulting lot will be at least 300 m². A corner lot has 2 adjoining boundaries with different roads (not lanes) that meet at an angle of 135° or less. The DCP (section 4.2) also asks for a primary frontage of at least 10 m at the building line for each lot.
Section 4.2 of the DCP still uses wording that differs from the amended clause, so check the current LEP text and confirm with Council how your type of dual occupancy is treated. NSW Planning also says a lot on which a secondary dwelling (granny flat) is built cannot be subdivided. See can you subdivide a dual occupancy.
Low and mid rise housing areas near four stations
The state's Low and Mid-Rise Housing Policy can change the answer near some stations and centres. NSW Planning's list includes Blacktown station and town centre, Doonside station, Mount Druitt station and town centre, and Seven Hills station, and the policy applies to land within 800 m walking distance of them. There, Chapter 6 of State Environmental Planning Policy (Housing) 2021 provides that:
- a dual occupancy needs a lot of at least 450 m² and 12 m wide at the front building line;
- subdividing it in Zone R1, R2 or R3 needs each lot to be at least 225 m² and 6 m wide at the front building line, with no more than one dwelling, lawful access and frontage to a public road, and no battle-axe lots; strata subdivision is excluded;
- the subdivision standards apply where consent for the dual occupancy was granted on or after 28 February 2025, or where the application for the subdivision and dual occupancy was made on or after that date.
The SEPP sets these as non-discretionary development standards. How they interact with clause 4.1C of the LEP for a particular lot is a question for Council or a town planner.
Excluded land includes bush fire prone land, heritage items and some flood prone land. NSW Planning's indicative map cannot account for individual property constraints or local walking networks, so the distance needs checking for each lot.
Lot width, depth and battle-axe lots in the established suburbs
Section 2.4 of DCP Part C says lots should be at least 12 m wide at the building line, corner lots at least 15 m wide, and no lot less than 20 m deep. Council may vary these, for example where the house is planned together with the subdivision, and asks applicants to discuss a variation first.
For a battle-axe (hatchet) lot, section 2.5 says:
- the access corridor is not counted in the minimum lot area;
- the corridor has a maximum length of 60 m and a minimum width of 3.5 m, or 5 m where shared by no more than 2 lots;
- the lot should be at least 12 m in any direction, and vehicles must be able to enter and leave in a forward direction.
Because the handle is excluded, a rear lot needs more land than the map figure alone suggests. See battle-axe subdivision explained.
Narrow frontage lots from old Government plans
Section 3.7 of the DCP covers R2 lots under 12 m wide that were created by a former plan, such as a Government plan from over 100 years ago. It asks for these lots to be consolidated to at least 12 m wide for a single dwelling or attached dual occupancy.
Growth Centre precincts: Marsden Park, Schofields, Riverstone and others
The Growth Centre Precincts DCP says lot sizes "will comply with the minimum lot size provisions" of the precinct SEPP, which it summarises in Table 3-2 by density band (dwellings per hectare, dw/Ha). The R2 columns include:
| Density band (dw/Ha) | 11 | 12.5 | 15 | 20 | 25 | 30 |
|---|---|---|---|---|---|---|
| Dwelling house (base), m² | 360 | 300 | 300 | 300 | 300 | 300 |
| Dwelling house with a Building Envelope Plan, m² | 360 | 300 | 250 | 225 | 225 | 225 |
| Dwelling house as an integrated housing DA, m² | 360 | 300 | 250 | 200 | 125 | 125 |
| Semi-detached dwelling, m² | 300 | 300 | 200 | 150 | 125 | 125 |
The DCP's minimum frontage for a front-loaded lot is 12.5 m in the 10 to 12.5 dw/Ha bands, 9 m at 15 dw/Ha and 7 m at 20 to 45 dw/Ha. A battle-axe lot with no street or park frontage needs at least 500 m², excluding the shared driveway, in the 10, 15 and 20 dw/Ha bands. The DCP notes that some lot sizes can be varied under the SEPP, so read the precinct plan that applies to your land.
In parts of Riverstone, clause 6.8(2) of Appendix 7 of the Central River City SEPP adds that consent must not be granted for subdivision of "Riverstone Scheduled Lands" unless every lot has frontage directly onto a public road and a maximum depth of 35 m. This does not apply to land with frontage directly onto Loftus Street, Bandon Road or Windsor Road.
Local infrastructure contributions
Council's section 7.11 contributions (formerly section 94) depend on the plan for your area. The Blacktown plans on the NSW Planning Portal include:
- No. 20 Riverstone and Alex Avenue Precincts, No. 21 Marsden Park, No. 22 Rouse Hill, No. 23 Riverstone West and No. 24 Schofields Precinct;
- No. 3 Open Space in Established Residential Areas, which charges by the population a development adds: $1,607 per person in the Rooty Hill and Mount Druitt catchment, at a December 2015 base indexed to CPI at the time of payment, with a dwelling house counted as 3.5 persons.
Growth area contributions are much higher. Council submitted a revised Contributions Plan No. 21 for Marsden Park to IPART in March 2026, with an average indicative rate of $93,653.50 across all catchments and dwelling types. IPART has since released its final report, and the NSW Planning Portal lists the Minister's advice to Council dated 29 July 2026. IPART says Council can charge the revised rates once the plan is adopted, so confirm with Council which version of the plan and which rates apply.
The state Housing and Productivity Contribution also applies to new residential lots in Greater Sydney: $13,522.84 per new dwelling lot as at 1 October 2026, indexed quarterly. Council can confirm which plans apply to a specific lot. For the state and titles fees added up for a two-lot split, see our Sydney and NSW subdivision cost guide.
Clause 4.6: when a lot falls short
Clause 4.6 of the LEP lets Council grant consent despite a breach of a development standard such as a minimum lot size, if the applicant shows compliance is unreasonable or unnecessary and there are sufficient environmental planning grounds. It is a request, not an entitlement, and it is limited for subdivision in the rural, large lot residential and environmental zones.
How subdivision approval works
For an ordinary residential subdivision, you lodge a development application with Blacktown City Council through the NSW Planning Portal, and some applications go to the Blacktown Local Planning Panel. Where the land is bush fire prone, the NSW Rural Fire Service must issue a bush fire safety authority; see subdividing bush fire prone land in NSW. After consent, Sydney Water issues a Section 73 Compliance Certificate where needed, and a subdivision certificate authorises the plan to be registered with NSW Land Registry Services.
| Fee (2026/27) | Amount |
|---|---|
| DA for subdivision, no new public road | $458 + $53 per additional lot |
| DA for subdivision opening a public road | $921 + $65 per additional lot |
| NSW LRS: lodge a deposited plan | $384.78 incl GST, plus $384.78 for each lot after the first |
Survey, servicing, contributions and works usually cost far more. For the full process, see how to subdivide land in New South Wales, and for an estimate of total costs, try our subdivision cost calculator.
Contacting Blacktown City Council
Council can be reached on 02 9839 6000 during business hours.
Check your own block
A Subdivision Checker report applies these rules to one address: planning and zoning, heritage, environment, contamination, bushfire, flood, servicing and access, measured lot geometry and concept subdivision design options, plus indicative cost ranges labelled as estimates. It is a starting point, not a substitute for advice from a licensed surveyor or town planner. To see how the checks are set out, view our sample report, or order a report for your address.
Frequently asked questions
What is the minimum lot size for subdivision in Blacktown?
In the established suburbs it is the figure shown for your land on the Lot Size Map in Blacktown Local Environmental Plan 2015, under clause 4.1. The figure varies across the city, so check your own lot. Council's DCP adds that lots should generally be at least 12 m wide at the building line and 20 m deep, and 15 m wide on a corner. In the Growth Centre precincts, such as Marsden Park, Schofields and Riverstone, different minimums apply under a State Environmental Planning Policy.
Can I subdivide a dual occupancy in Blacktown?
It depends on the type of dual occupancy and the lot. Clause 4.1C of Blacktown LEP 2015, as amended in 2022, restricts separate titles for the two dwellings of a detached dual occupancy unless each new lot meets the Lot Size Map minimum, or the land is a corner lot where each dwelling fronts a different road and each lot is at least 300 m². Separately, within a low and mid rise housing area, the Housing SEPP sets standards of at least 225 m² and 6 m wide per lot for subdividing qualifying dual occupancies. Check the current LEP text, and a licensed surveyor or town planner can advise on a specific lot.
How do I find the minimum lot size for my Blacktown property?
Search your address on the NSW Planning Portal Spatial Viewer and turn on the Land Zoning Map and Lot Size Map layers. Then read Part 4 of Blacktown LEP 2015 and Part C of Blacktown DCP 2015. A section 10.7 planning certificate from Council states the planning controls and hazards that apply to the land. If your land is in a Growth Centre precinct, the precinct controls apply instead.
Are lot sizes different in Marsden Park, Schofields and Riverstone?
Yes. These suburbs are in the North West Growth Area, where the precinct plans in State Environmental Planning Policy (Precincts—Central River City) 2021 and the Blacktown Growth Centre Precincts DCP 2010 apply. Minimum lot sizes depend on the density band for the land. For a dwelling house the DCP's summary ranges from 360 m² down to 300 m², or as low as 225 m² with a Building Envelope Plan, and 125 m² in some bands for integrated housing applications.
Who approves a subdivision in Blacktown?
For an ordinary residential subdivision, Blacktown City Council assesses the development application, which is lodged through the NSW Planning Portal. Some applications go to the Blacktown Local Planning Panel. After approval, a subdivision certificate authorises the plan to be registered with NSW Land Registry Services. In 2026/27 the state-set DA fee for a subdivision with no new road is $458 plus $53 per additional lot.
What contributions apply to a subdivision in Blacktown?
It depends on where the land is. Council's contributions plans on the NSW Planning Portal include plans for Marsden Park, Schofields, Rouse Hill, Riverstone and Alex Avenue, and for open space in established residential areas. The state's Housing and Productivity Contribution also applies to new residential lots in Greater Sydney, at $13,522.84 per new dwelling lot as at 1 October 2026. Council can confirm which plans apply to a specific lot.
Sources
- Blacktown Local Environmental Plan 2015 (NSW Legislation)
- Blacktown Local Environmental Plan 2015, as made (NSW Legislation)
- Blacktown Local Environmental Plan 2015 (Amendment No 31), as made (NSW Legislation)
- Blacktown Local Environmental Plan 2015 (Amendment No 32), as made (NSW Legislation)
- Blacktown Development Control Plan 2015 (Blacktown City Council)
- Blacktown DCP 2015 Part C: Development in the Residential Areas (Blacktown City Council)
- North West Growth Area (Blacktown City Council)
- Blacktown City Council Growth Centre Precincts Development Control Plan 2010, amended October 2025 (NSW Planning Portal)
- Blacktown Local Planning Panel assessment report, DA-24-00956 (Blacktown City Council)
- Blacktown City Council contributions plans (NSW Planning Portal)
- Section 94 Contributions Plan No. 3: Open Space in Established Residential Areas (Blacktown City Council, NSW Planning Portal)
- Assessment of Blacktown City Council Contributions Plan No. 21 Marsden Park (IPART)
- IPART reviewed section 7.11 contributions plans (NSW Planning Portal)
- State Environmental Planning Policy (Housing) 2021 (NSW Legislation)
- State Environmental Planning Policy (Housing) Amendment (Low and Mid Rise Housing) 2025, as made (NSW Legislation)
- Low and Mid-Rise Housing Policy (NSW Planning)
- Low and Mid-Rise Housing Policy: summary of key provisions (NSW Planning)
- Secondary dwellings (NSW Planning)
- NSW Planning Portal Spatial Viewer
- Planning certificates fact sheet (NSW Planning Portal)
- Schedule of planning and development fees and charges 2026/27 (Department of Planning, Housing and Infrastructure)
- NSW Land Registry Services 2026/27 fees
- Housing and Productivity Contribution (NSW Planning)
- Section 73 Compliance Certificates (Sydney Water)
- Building in a bush fire area: what you need to know (NSW Rural Fire Service)
This guide is general information only, current at November 2026. Rules, fees and maps change, and every block is different. Speak to a licensed surveyor or town planner about your property.
