Owning a few hectares can make subdivision look simple: there is plenty of land, so surely it can be split. In practice, rural land is often harder to subdivide than a suburban block. Every state uses its rural zones to protect farmland, landscapes and water catchments, and to keep housing in towns where services are.
This guide explains how rural minimum lot sizes work, where new lots are only allowed by exception, and the other matters that come up on rural and acreage land.
Why rural subdivision is restricted
Rural zones have different aims from residential zones. They are there to keep land available for farming, protect the environment and avoid scattered housing that is costly to service. As a result:
- minimum lot sizes are large, often tens of hectares
- some zones allow new lots only for farming or other rural uses, not for housing
- a new lot may not come with the right to build a house
Can I subdivide my acreage? It depends on the zone and the minimum lot size that applies to your land. Rural zones generally set large minimums, often tens of hectares, and some areas allow new lots only by exception or not at all for housing. Your council's planning scheme sets the rules for your land.
Victoria
Victoria's rural zones set a default minimum lot size, which councils can change in the schedule to the zone.
What is the minimum lot size in the Victorian Farming Zone? Each lot must be at least the area specified in the schedule to the zone. If no area is specified, each lot must be at least 40 hectares. In the Rural Living Zone the default is 2 hectares if the schedule specifies no area.
The Green Wedge Zone has the same 40 hectare default when no area is specified. Schedules can set a different area. Colac Otway Shire's Farming Zone checklist, for example, gives 40 hectares for land south of the Princes Highway and west of Ballarat Road, and 80 hectares for land north of the Princes Highway and east of Ballarat Road.
New South Wales
In NSW, the minimum lot size for rural land is shown on the Lot Size Map in the council's local environmental plan (LEP). Under clause 4.1 of the standard NSW LEP template, a lot created by subdivision generally cannot be smaller than the size shown on the map for that land.
Being able to create a lot is a separate question from being able to build a house on it.
Does a rural lot automatically come with the right to build a house? No. In NSW, for example, Glen Innes Severn Council explains that a dwelling can only be built on rural land where one of the standards in its local environmental plan is met, and that a lot having a dwelling entitlement does not grant approval to construct a dwelling.
If the land is mapped as bush fire prone, the NSW Department of Planning's circular on bush fire prone land says residential or rural subdivision there requires an approval from the NSW Rural Fire Service, called a bush fire safety authority. Our guide to subdividing bush fire prone land in NSW explains how that works.
Western Australia
WA takes a firm line on rural lots. State Planning Policy 2.5 Rural planning says the creation of new rural lots through ad hoc, unplanned subdivision will not be permitted.
Can I subdivide rural land in WA? WA's State Planning Policy 2.5 says the creation of new or smaller rural lots will be by exception. Development Control Policy 3.4 lists the exceptions, such as boundary realignments with no increase in the number of lots, homestead lots of between one and four hectares, and conservation lots.
Under Development Control Policy 3.4, a homestead lot can be up to 20 hectares where needed to suit the landform. Conservation lots generally need at least 85 per cent of the lot to have high environmental values, protected by a conservation covenant in perpetuity on the title.
Queensland
In Queensland, the State limits subdivision in South East Queensland. Somerset Regional Council explains that in the SEQ Regional Landscape and Rural Production Area, under the Planning Regulation 2017, reconfiguring a lot is prohibited unless an exception applies. One exception is where each lot created is at least 100 hectares.
Outside that area, check your council's planning scheme for the rural lot size that applies.
South Australia
Much of the agricultural land surrounding metropolitan Adelaide is in the Environment and Food Production Areas (EFPAs). PlanSA says the EFPAs began in 2017, that subdivision for residential purposes is prevented within them, and that since 1 April 2019 land division applications to create one or more additional allotments within EFPAs are no longer permitted. The next review of the areas is due in 2027.
The Legal Services Commission's Law Handbook explains that owners of land in an EFPA are not permitted to subdivide their land to create additional residential allotments. Land division for other purposes needs the agreement of both the council and the State Planning Commission.
Outside the EFPAs, rural land division is assessed under the Planning and Design Code, which sets the policies for each zone.
Tasmania
Tasmania's State Planning Provisions set the zone rules in council areas where the Tasmanian Planning Scheme is in effect. A small number of areas, including Kingborough, are still moving across from older interim schemes. The State Planning Office's rural zones fact sheet says subdivision for housing is not allowed in rural zones.
- Rural Zone: lots of at least 40 hectares are allowed, along with smaller lots needed for rural uses. The acceptable solution also requires a frontage of no less than 25 m.
- Agriculture Zone: subdivision is generally limited, to reduce the breakup of agricultural land and its conversion to other uses.
Other matters on rural land
Even where the lot size allows a split, rural subdivision usually involves more than a suburban one:
- bushfire: much rural land is bushfire prone, which can mean extra approvals, separation distances and access rules
- wastewater: without a sewer, each lot needs room for an on-site system that meets health and environmental standards
- water and power: connection to mains water or power may not be available or may be costly to extend
- road access: each lot needs legal and practical access, which can mean new crossovers or road upgrades
- vegetation and waterways: native vegetation, wetlands and watercourses often have their own controls
Getting advice
Rural subdivision rules vary a great deal between councils and even within one council area. A town planner can confirm the zone, the minimum lot size and any state limits that apply, and a licensed surveyor can advise on the layout.
If you would like a first look at the zoning, constraints and lot measurements for your address, you can check your block with Subdivision Checker.
Sources
- Clause 35.07 Farming Zone (Victorian Planning Provisions)
- Clause 35.03 Rural Living Zone (Victorian Planning Provisions)
- Clause 35.04 Green Wedge Zone (Victorian Planning Provisions)
- Farming Zone subdivision checklist (Colac Otway Shire)
- Minimum subdivision lot size, clause 4.1 of a standard NSW LEP (Randwick Local Environmental Plan 2012, NSW legislation)
- Building a house on rural land fact sheet (Glen Innes Severn Council)
- Planning Circular PS 21-010 Development on bush fire prone land (NSW Department of Planning)
- State Planning Policy 2.5 Rural planning (WA Planning Commission)
- Development Control Policy 3.4 Subdivision of rural land (WA Planning Commission)
- Subdividing land in the rural zone (Somerset Regional Council)
- Environment and Food Production Areas (PlanSA)
- Environment and Food Production Areas (Law Handbook, Legal Services Commission of SA)
- Tasmanian Planning Scheme rural zones fact sheet (State Planning Office)
- Rural Zone, Tasmanian Planning Scheme State Planning Provisions (Kingborough Council)
This guide is general information only. For advice on your property, speak with a licensed surveyor or town planner in your state.
