Queensland has no single statewide minimum lot size for subdivision. Each council sets its own minimums in its planning scheme, usually in the rules for reconfiguring a lot (Queensland's term for subdivision), and the figure changes with the zone and often the precinct. In Brisbane, a standard Low density residential lot is 450 m², while Logan lists 400 m² for its suburban precinct and Moreton Bay lists 600 m² for its Suburban neighbourhood precinct.
So the answer to "how big does my block need to be to subdivide in Queensland?" starts with two questions: which council, and which zone. This guide sets out Brisbane's figures in detail, including the new 120 m² lots, compares Logan, Moreton Bay and the Gold Coast, and explains the other tests a block has to pass. Figures are as at November 2026.
Minimum lot sizes at a glance (as at November 2026)
| Council (planning scheme) | Zone and precinct | Minimum lot size | Minimum frontage |
|---|---|---|---|
| Brisbane (City Plan 2014) | Low density residential | 450 m² front lot, 600 m² rear lot. Small lots down to 400 m², or 300 m² within 300 m walking distance of a shopping centre | Set in City Plan's Subdivision code |
| Brisbane (City Plan 2014) | Character residential | 450 m² front lot, 600 m² rear lot | Set in City Plan's Subdivision code |
| Brisbane (City Plan 2014) | Character residential, Infill housing precinct | 300 m² front lot, 450 m² rear lot | Set in City Plan's Subdivision code |
| Brisbane (City Plan 2014) | Low-medium density residential, 3 or 4 storey mix precinct, outside Key Locations | 120 m² where design criteria are met. A rear lot under 350 m² is impact assessable | A 120–180 m² lot with a frontage under 6 m is impact assessable |
| Logan (Logan Planning Scheme 2015, v9.2) | Low density residential, small lot precinct | 300 m² (rear lots not permitted) | Not listed on council's summary |
| Logan | Low density residential, suburban precinct | 400 m² (a rear lot under 500 m² is impact assessable) | Not listed on council's summary |
| Logan | Low density residential, village precinct | 500 m² (a rear lot under 600 m² is impact assessable) | Not listed on council's summary |
| Logan | Low density residential, large suburban precinct | 1,000 m² | Not listed on council's summary |
| Moreton Bay (MBRC Planning Scheme) | General residential, Suburban neighbourhood and Coastal communities precincts | 600 m² (maximum density 11 lots per hectare) | 12.5 m |
The Brisbane Low density residential, Character residential and Infill housing figures are from council's Subdividing land fact sheet, with the 300 m walking distance updated for the September 2026 amendment. The Logan and Moreton Bay figures are from each council's own reconfiguring a lot page. Always check the current planning scheme for your zone, precinct and overlays.
Brisbane: minimum lot sizes under City Plan 2014
Brisbane's rules sit in Brisbane City Plan 2014. Council's Subdividing land page tells you to identify your zone first, then check the minimum lot sizes and frontages that apply to that zone in City Plan online. Searching your address on City Plan online shows the zoning, overlays and neighbourhood plans for the site.
Low density residential zone
This is the zone most Brisbane houses sit in. Council's Subdividing land fact sheet lists:
- 450 m² for a front lot and 600 m² for a rear lot.
- 400 m² for a small lot. The fact sheet defines a small lot as a lot under 450 m², or a rear lot under 600 m² excluding the access way.
- 300 m² for a small lot near a centre, subject to walking distance.
The walking distance changed in September 2026. Council's notice of adoption says the More Homes, Sooner amendment expanded the area where the existing 300 m² minimum applies, and council's amendment page describes it as properties within 300 m walking distance of a shopping centre, up from 200 m. The fact sheet ties this to a Centre zone of more than 2,000 m².
How the figures work in practice: under the amended assessment table, an application in this zone becomes impact assessable if a new lot is under 400 m², or a rear lot is under 600 m², where any part of the site's frontage is more than 300 m walking distance from that centre. Below 300 m² it is impact assessable even near a centre.
Character residential zone
The fact sheet lists 450 m² for a front lot and 600 m² for a rear lot in the Character residential zone, and 300 m² and 450 m² in its Infill housing zone precinct.
Low-medium density residential zone: the new 120 m² lots
Brisbane's biggest recent change is here. Under the More Homes, Sooner amendment, adopted by council on 18 August 2026 and in effect from 18 September 2026 as City Plan Amendment v37.00/2026:
- Two former precincts were combined into a new Low-medium density residential (3 or 4 storey mix zone precinct), with no change to the location or number of properties in the zone.
- The minimum lot size in that precinct is 120 m² where a site is more than 400 m walking distance from frequent public transport or centres, with specific design and servicing requirements for these lots. Council's fact sheet for consultation described this as a reduction from 260 m² to 120 m².
- Council lists 400 m² for dual occupancies outside Key Locations, and 800 m² for multiple dwellings of up to 4 storeys within Key Locations.
Key Locations are, broadly, land in or within 400 m walking distance of the larger centres, and land within 400 m walking distance of a public transport stop or station with services every 20 minutes or better on weekdays and every 30 minutes or better on weekends. Check City Plan online for the exact definition.
The amended assessment table also sets triggers for impact assessment in this precinct. Outside Key Locations, these include a lot under 120 m², a lot of 120–180 m² that is accessed from a major road or has a frontage under 6 m, and a rear lot under 350 m². Where part of the lot frontage is within a Key Location, a new lot under 600 m² without an associated assessable material change of use is impact assessable. A lot counts as outside a Key Location only if its entire frontage is outside it.
For the background and the consultation history, see Brisbane's 120 m² lots now in force.
For Brisbane's zones, character and flood overlays, infrastructure charges and the application and plan sealing steps in one place, see our Brisbane City Council subdivision guide. We also have council guides for the City of Gold Coast, the City of Moreton Bay and Logan City Council.
Other South East Queensland councils
Logan
Logan City Council's reconfiguring a lot page, under the Logan Planning Scheme 2015 (version 9.2), lists minimum lot sizes for each precinct of the Low density residential zone: 300 m² (small lot), 400 m² (suburban), 500 m² (village), 1,000 m² (large suburban), 2,000 m² (small acreage) and 4,000 m² (acreage). Rear lots are not permitted in the small lot and acreage precincts.
Reconfiguring a lot in Logan is code assessable unless it meets the impact assessment criteria on that page. In the suburban precinct, a rear lot under 500 m² makes the application impact assessable; in the village precinct, the trigger is a rear lot under 600 m².
Moreton Bay
The City of Moreton Bay's reconfiguring a lot information sheet lists, for the General residential zone:
- Suburban neighbourhood precinct: 600 m² minimum lot size, 12.5 m minimum frontage, maximum density of 11 lots per hectare.
- Coastal communities precinct: the same 600 m², 12.5 m and 11 lots per hectare.
- Next generation neighbourhood precinct: no minimum lot size, but a minimum net density of 10 lots per hectare.
Council notes these figures are mostly "examples" in the code. A town planner can explain what that means for an application on your site.
Gold Coast
The City of Gold Coast does not publish a single figure on its reconfiguring a lot page. It says subdivision is code assessable in all zones under City Plan Part 5.6 provided the required lot sizes are met, and that three overlays can change the zone minimum: the ridges and significant hills protection overlay, the residential density overlay and the minimum lot size overlay. Proposed lots below the stated minimum need an impact assessable application. Check City Plan for your zone and those overlays.
What happens if a lot is below the minimum
In Queensland a minimum lot size is often a trigger rather than an absolute bar. Proposing a smaller lot usually changes the application from code assessment to impact assessment, as the Brisbane, Logan and Gold Coast examples show. That matters because:
- Impact assessable applications must be publicly notified.
- People who make a properly made submission can appeal the decision to the Planning and Environment Court.
The process is longer and the result less certain, and none of this is an entitlement to a smaller lot.
What else decides whether a block can be split
Meeting the lot size is only the first test. Other things that can stop or reshape a subdivision include:
- Frontage and shape. Many codes set a minimum frontage, such as Moreton Bay's 12.5 m, so a narrow block can meet the area and still not fit two lots side by side.
- Access to a rear lot. A rear (battle-axe) lot needs a driveway strip, and in Brisbane that access way is excluded when measuring the lot. See battle-axe subdivision explained.
- The existing house. It has to fit on its new lot with the setbacks, access and services the scheme requires.
- Overlays. Council overlays for flood, bushfire, heritage and character can add requirements or change the layout. Moreton Bay's information sheet, for example, says its bushfire hazard overlay can apply when you reconfigure a lot.
- Servicing. Water, sewer, stormwater and power connections have to be available, and Brisbane's small lots in the Low-medium density residential zone carry specific servicing requirements.
- Easements and title. Easements and covenants on the title can dictate where boundaries go.
Who approves a subdivision in Queensland
Reconfiguring a lot is development under the Planning Act 2016. For a typical residential subdivision, the local council is the assessment manager and decides the application against its planning scheme. The Queensland Government notes that the relevant local government is often the assessment manager.
Brisbane City Council says a subdivision may need one or more of a development approval, building approval and operational works approval. Once the subdivision is complete and all charges are paid, council must endorse your survey plan, a step known as plan sealing. The sealed plan must then be lodged for registration with Titles Queensland within 6 months, and the new titles are issued under the Land Title Act 1994.
For the full process, timeframes and fees, see How to subdivide land in Queensland. For Brisbane's council fees and infrastructure charge added up for a two-lot and three-lot split, see our Brisbane subdivision cost guide. To compare Queensland with other states, see Minimum lot size for subdivision in every Australian state.
Changes on the way
Several large councils are replacing their planning schemes, but none of these is in force:
- Logan: Logan Plan is council's proposed new planning scheme. Consultation ran from 1 September to 31 October 2025, and council's timeline shows adoption in 2029–2030.
- Moreton Bay: in January 2026, council resolved to replace the current MBRC Planning Scheme. Council says it will undertake early community engagement.
- Sunshine Coast: council consulted on a proposed new scheme from 15 July to 19 September 2025 and is reviewing submissions. Council says decisions should not be based on the content of the proposed scheme at this stage.
Until a new scheme commences, the current scheme's lot sizes apply.
Check your own block
A Subdivision Checker report applies these rules to one address: planning and zoning, including the minimum lot size rules that apply, heritage, environment, contamination, bushfire, flood, servicing and access, measured lot geometry and concept subdivision design options, plus indicative cost ranges labelled as estimates. It is a starting point, not a substitute for advice from a registered surveyor or town planner. To see how the checks are set out, view our sample report, or order a report for your address.
Frequently asked questions
What is the minimum lot size for subdivision in Queensland?
There is no single statewide minimum. Each council sets minimum lot sizes in its planning scheme, by zone and often by precinct. For example, Logan lists 400 m² for the suburban precinct of its Low density residential zone, and Moreton Bay lists 600 m² with a 12.5 m frontage for the Suburban neighbourhood precinct of its General residential zone.
What is the minimum land size for subdivision in Brisbane?
It depends on the zone and precinct. Brisbane City Council's Subdividing land fact sheet lists 450 m² for a front lot and 600 m² for a rear lot in the Low density residential zone, with small lots down to 400 m², or 300 m² close to a shopping centre. Since 18 September 2026, lots can be as small as 120 m² in part of the Low-medium density residential zone, outside Key Locations, where design criteria are met.
Can I subdivide a 600 m² block in Brisbane?
The lot size is only one test. In Brisbane's Low density residential zone, a new lot under 300 m² makes the application impact assessable. Where any part of the site's frontage is more than 300 m walking distance from a shopping centre, so does a new lot under 400 m² or a rear lot under 600 m². Frontage, access, the existing house, overlays and servicing must also work. A registered surveyor or town planner can tell you what council is likely to require for your site.
Does the access driveway count towards a rear lot's size in Brisbane?
No. Brisbane City Council's Subdividing land fact sheet treats a rear lot of less than 600 m², excluding the access way, as a small lot. Other councils have their own rear lot rules: in Logan's suburban precinct, a rear lot under 500 m² makes the application impact assessable, and the small lot precinct does not permit rear lots.
What happens if a proposed lot is below the minimum?
In many Queensland councils it does not stop an application being made, but it changes the level of assessment from code to impact assessment. Impact assessable applications must be publicly notified, and people who make a properly made submission can appeal to the Planning and Environment Court.
Are Queensland minimum lot sizes changing?
Some are. Brisbane's More Homes, Sooner amendment took effect on 18 September 2026. Logan, Moreton Bay and the Sunshine Coast are each preparing new planning schemes, but these are not in force, and Logan's timeline shows adoption in 2029–2030.
Sources
- Brisbane City Council – Citywide amendment: More Homes, Sooner – Low-medium density residential design
- Brisbane City Council – Public notice of adoption (Queensland Government Gazette), City Plan v37.00/2026
- Brisbane City Council – Schedule of amendments, More Homes, Sooner – Low-medium density residential design (v37.00/2026)
- Brisbane City Council – More Homes, Sooner fact sheet
- Brisbane City Council – Subdividing land fact sheet (Brisbane City Plan 2014)
- Brisbane City Council – Subdividing land
- Brisbane City Council – Plan sealing requests
- Brisbane City Council – City Plan online
- Reconfiguring a lot (Logan City Council)
- Logan Plan and current planning scheme (Logan City Council)
- MBRC Planning Scheme – Reconfiguring a lot information sheet (City of Moreton Bay)
- MBRC Planning Scheme (City of Moreton Bay)
- Bushfire hazard overlay information sheet (City of Moreton Bay)
- Reconfiguring a lot (City of Gold Coast)
- New Sunshine Coast Planning Scheme (Sunshine Coast Council)
- Development assessment in Queensland fact sheet (Queensland Government)
- Planning Act 2016 (Qld)
This guide is general information only, current at November 2026. Rules, fees and maps change, and every block is different. Speak to a registered surveyor or town planner about your property.
