On the Gold Coast, subdivision is called reconfiguring a lot, and the rules come from the Gold Coast City Plan, which replaced the previous planning scheme on 2 February 2016. Your zone sets the starting point, three overlays can change the minimum lot size, and the size of your proposed lots decides whether the application is code assessable or impact assessable. The City of Gold Coast is the decision-maker.
Unlike some councils, the City of Gold Coast does not publish one headline minimum. Its reconfiguring a lot page sends you through a three-step check instead, which this guide walks through. Flood, bushfire, landslide and heritage overlays, council's infrastructure charges and its own water and sewer network then add their own layer. Figures are as at November 2026.
Which version of City Plan applies
Council's ePlan shows City Plan Version 14, which took effect on 29 September 2026. It brought in Minor and Administrative Amendment 13 and an interim amendment to the Local Government Infrastructure Plan (LGIP). Council's City Plan amendments page still lists Version 13 as the latest, so rely on the ePlan for the current version. The previous version, Version 13 (9 December 2025), brought in the New Road Widening Overlay Amendment, the Yatala Enterprise Area Industry Amendment and Minor and Administrative Amendment 12. Earlier recent versions were Version 12 (27 June 2025) and Version 11 (6 February 2024).
Council's online City Plan, the ePlan, "will always display the most current version of the City Plan", and superseded versions can be selected with its "Change" button. If you are reading an older printout or code template, check it against the current version.
One amendment listed on council's amendments page is still in progress:
- Designing for flood (major amendment). Council says the proposal is with the State government for review, with public consultation still to come. Its Planning for flood page says council is updating City Plan "to introduce a risk-based approach".
A new planning scheme is coming (proposed)
Council says it is "preparing a new Planning Scheme (replacing the City Plan) and a Local Growth Management Strategy". Council decided to prepare both in December 2023, and the Planning Minister approves the new scheme at key milestones.
The Local Growth Management Strategy (In-Principle Version, March 2026) was open for comment from 20 April to 31 July 2026 and is now being refined. It says suburban neighbourhoods "will see gentle residential growth with more duplexes, townhouses, and small-lot detached homes". The strategy itself "does not regulate development or determine specific zoning", and council's engagement site lists the new Planning Scheme for 2027. No draft lot sizes have been published. Until a new scheme commences, City Plan continues to apply.
How to find your zone and overlays
Council's City Plan interactive mapping tool lets you search for your property and see the zone and overlays that apply to it. Council's planning pages explain how to switch layers. For example, to check bushfire hazard you turn off the Zones layer, turn on the Bushfire hazard overlay and search for your address. Building setbacks sit under "Supporting layers > Administrative and other supporting information".
Council's City Plan Hotline (1300 151 267, cityplan@goldcoast.qld.gov.au) answers questions about the scheme.
How to find your minimum lot size
Council's reconfiguring a lot page sets out three steps:
- Identify your property's zone.
- Check whether any of three overlays affect the minimum lot size:
- the ridges and significant hills protection overlay
- the residential density overlay
- the minimum lot size overlay.
- Refer to Part 5.6 of City Plan for the minimum lot size.
The overlay step matters on the Gold Coast. Two neighbouring lots in the same zone can have different minimums if one is mapped under the residential density overlay or the minimum lot size overlay and the other is not, so check all three overlay maps, not just the zone map. Lot size is also only one test. Frontage, access, an existing house that has to fit on its new lot, and the other codes in City Plan all shape a layout.
Low density residential zone
Most suburban house lots on the Gold Coast are in the Low density residential zone. In the current City Plan shown in council's ePlan (November 2026), Table 5.6.1 makes subdivision in this zone code assessable if it results in no lots smaller than the minimum shown on the Minimum lot size overlay map. Where a lot is not identified on that map, every lot must meet these minimums:
- 600 m²
- 400 m² where on a lot with dual frontage
- 400 m² in the Calypso Bay precinct
- no additional lots in the Large lot precinct.
Lot sizes for rear lots are measured excluding the access strip or access easement. The Reconfiguring a lot code sets no single minimum frontage for this zone. For a rear lot, its acceptable outcomes are that the rear lot has the same width as the lot it sits behind, only one rear lot is created, and the rear lot is for a dwelling house. Access strips or easements in the Low density residential zone have a minimum width of 4.5 m. The Medium and High density residential zones work differently. Where a lot is mapped on the residential density overlay, the minimum ranges from 400 m² (RD1) down to 125 m² (RD5), with no minimum in RD6 to RD8. Otherwise the minimum is 400 m², or 600 m² where the lot is mapped on the ridges and significant hills protection overlay.
For rear lots, see battle-axe subdivision explained. For how Gold Coast compares with Brisbane, Logan and Moreton Bay, see the minimum lot size for subdivision in Queensland.
Code or impact assessable
Council says subdivision is code assessable in all zones under City Plan Part 5.6 Tables of Assessment, provided the required lot sizes are met. If proposed lots are smaller than the stated minimum, an impact assessable application is required.
That is a big difference in practice:
- Code assessable applications are assessed against the codes in City Plan and are not usually publicly notified.
- Impact assessable applications must be publicly notified for a minimum period set by the State's Development Assessment Rules, and people who make a properly made submission can appeal to the Planning and Environment Court.
Council lists other types of reconfiguring a lot as code assessable too:
- Boundary realignments, where the realigned lots must meet the zone code requirements and allow the lawful use of the affected lots.
- Community title schemes (dividing land by agreement), which council says are typically used for dual occupancies or multiple dwellings.
- Access easements, which usually accompany another reconfiguration to give access to a constructed road.
Flood, bushfire and landslide
The Gold Coast maps several natural hazards in City Plan, and each can shape where lots, houses and driveways can go.
- Flood. Council says "Provisions may apply under the City Plan Flood overlay code" when building or developing in a flood risk area. Its flood maps show whether a property is in a flood risk area. A flood level search report gives the estimated designated flood level (in metres AHD) and the ground level at the centre of the property, but "does not show the flood extent", and it covers riverine or regional flooding only, not local flash flooding. Council's Defined Flood Level shows how high floodwaters are expected to rise in a Defined Flood Event, and the Flood Planning Level adds a margin, usually 30 to 50 cm, above it.
- Bushfire. City Plan's bushfire hazard overlay map is based on the State's Bushfire Prone Area mapping. Council says "Development within these areas is assessed against the City Plan bushfire hazard overlay code."
- Landslide. City Plan's landslide hazard overlay code "regulates development on land mapped as moderate to very high susceptibility". New development may need a geotechnical assessment by an RPEQ-registered engineer. Council is reviewing its landslide mapping for the new planning scheme.
Questions about the Flood overlay can go to council on 07 5582 8708.
Heritage
Local heritage places are entered on the Gold Coast Local Heritage Register and identified in City Plan's Heritage overlay. Council lists reconfiguring a lot as one of the types of development on a local heritage place. Some local places are also on the Queensland Heritage Register, and for those "Development approval must be sought from the State administering authority". Minor works may be eligible for a Heritage Exemption Certificate.
If a heritage place has to be kept, the new lot boundaries have to work around it. Aboriginal cultural heritage duties under state law apply as well; see how to subdivide land in Queensland.
How the application works
- Check the rules for your zone and overlays, and consider council's pre-lodgement service (prelodgementadvice@goldcoast.qld.gov.au).
- Lodge the application on council's reconfiguring a lot form, with owner's consent (the State's DA Form 1 for individual or company owners). Council takes new applications online, and later correspondence, such as information responses, goes to mail@goldcoast.qld.gov.au. Fees are set out in council's Register of fees and charges. An infrastructure charge proposal summary form is also required for a standard subdivision (council exempts boundary realignments and access easements).
- Operational works. Council says an infrastructure works application is needed when triggered under City Plan Table 5.8.2. Examples include "providing infrastructure for the development of a subdivision" and service upgrades required by the conditions of a reconfiguring a lot approval.
- Plan sealing and titles (below).
Statutory timeframes come from the State's Development Assessment Rules. For the full process and appeal rights, see how to subdivide land in Queensland.
Infrastructure charges, water and sewer
Council's Charges Resolution (No. 1) of 2025 took effect on 1 July 2025, replacing the 2023 resolution. Council says it adopts the "prescribed amount" under Schedule 16 of the Planning Regulation 2017. From 1 July 2026, Schedule 16 lists $38,029.25 for each dwelling house with 3 or more bedrooms and $27,163.80 for 2 or fewer bedrooms. Schedule 16 has no separate figure for each new lot, so how these amounts apply to a subdivision, and the credit for the existing lot, are set out in council's resolution. Council also says exemptions for some developments under the 2023 resolution are being phased out, with a reduction to 50% from 1 January 2026 and to 0% from 1 January 2027. Ask council's Developer Contributions Team to confirm the figure for your site.
Council says infrastructure charges help fund "local roads, parks, stormwater, water supply and sewerage". Payment is due when one or more triggers occur, including when "sealing of survey plans is complete". The Developer Contributions Team can be reached on 07 5582 9030 or dcg@goldcoast.qld.gov.au.
The City of Gold Coast also runs the water and sewerage network. Only accredited contractors can carry out standard connections, which must comply with the SEQ Design and Construction Code. Anything else is a non-standard connection, which needs Operational Works approval first. Connection applications go to Applications@goldcoast.qld.gov.au. Council's mapping search also offers infrastructure drawings showing sewer mains, manholes and connection points, although these do not usually show easements. For an overall estimate, try our subdivision cost calculator.
Plan sealing and titles
Once the works are done, you lodge the plan of subdivision (survey plan) with council for approval. Council needs the approval conditions met, rates, water charges, infrastructure charges, bonds and inspections up to date, and any easements, covenants, transfers or Community Management Statements signed. Fees are paid at lodgement, and email lodgement is not accepted.
Council says "Properly made applications will be assessed within 20 business days." You then have 6 months from council approval to lodge the plan with Titles Queensland. If you miss it, council approval lapses and you must reapply with new fees and up-to-date charges. Titles Queensland's FY2026/27 fees include $496.12 for a plan of survey plus $36.49 for each lot, and $94.42 for each new title.
If you are looking at a block with earlier approvals, council's planning and development certificates help. Only a full certificate states whether each condition of a current approval has been fulfilled.
Contacting the City of Gold Coast
Council can be reached on 1300 GOLDCOAST (1300 465 326) or 07 5629 5629, from 7am to 6pm Monday to Friday. Its postal address is PO Box 5042, Gold Coast MC QLD 9726, and its customer service centres include 47 Nerang Street, Southport. For City Plan questions, call the City Plan Hotline on 1300 151 267.
Check your own block
A Subdivision Checker report applies these rules to one address: planning and zoning, heritage, environment, contamination, bushfire, flood, servicing and access, measured lot geometry and concept subdivision design options, plus indicative cost ranges labelled as estimates. It is a starting point, not a substitute for advice from a licensed surveyor or town planner. To see how the checks are set out, view our sample report, or order a report for your address.
Frequently asked questions
What is the minimum lot size for subdivision on the Gold Coast?
There is no single figure. The City of Gold Coast says the minimum depends on your zone and on three overlays that can change it: the ridges and significant hills protection overlay, the residential density overlay and the minimum lot size overlay. The figure for your lot is set out in Part 5.6 of City Plan. A licensed surveyor or town planner can confirm the figure that applies to a specific lot.
What is the minimum lot size in the Low density residential zone on the Gold Coast?
Under Table 5.6.1 of City Plan, subdivision in the Low density residential zone is code assessable if no lot is smaller than the minimum on the Minimum lot size overlay map. Where a lot is not on that map, each lot must be at least 600 m², or 400 m² where on a lot with dual frontage or in the Calypso Bay precinct, and no additional lots are allowed in the Large lot precinct. Rear lot sizes exclude the access strip or easement. Smaller lots need an impact assessable application.
Can I subdivide on the Gold Coast?
It is not ruled out, but it depends on your zone, the overlays mapped over your lot, and whether each proposed lot meets the minimum in Part 5.6 of City Plan. Council says subdivision is code assessable in all zones if the required lot sizes are met. Smaller lots need an impact assessable application, which is publicly notified and can be appealed by submitters. A licensed surveyor or town planner can advise on a specific lot.
Which version of the Gold Coast City Plan applies?
At November 2026, council's ePlan shows City Plan Version 14, which took effect on 29 September 2026 (council's City Plan amendments page still lists Version 13). Council's ePlan displays the most current version by default. A new planning scheme to replace City Plan is being prepared, and council's engagement site lists it for 2027.
What infrastructure charges apply to a Gold Coast subdivision?
Council's Charges Resolution (No. 1) of 2025 took effect on 1 July 2025 and adopts the prescribed amount under Schedule 16 of the Planning Regulation 2017. Charges help fund local roads, parks, stormwater, water supply and sewerage, and sealing of the survey plan is one of the payment triggers. Council's Developer Contributions Team can confirm the charge and any credits for your lot.
How long does plan sealing take on the Gold Coast?
Council says properly made plan sealing applications are assessed within 20 business days. You then have 6 months from council approval to lodge the plan with Titles Queensland, or the approval lapses and you must reapply with new fees and up-to-date charges.
Does flood or bushfire stop me subdividing on the Gold Coast?
Not automatically, but both add controls. Development in mapped bushfire hazard areas is assessed against City Plan's bushfire hazard overlay code, and provisions may apply under the Flood overlay code. A flood level search report gives the designated flood level for a property, but not the flood extent. A town planner can advise how these rules affect a layout on your lot.
Sources
- Reconfiguring a lot (City of Gold Coast)
- City Plan Part 5.6, Table 5.6.1 Reconfiguring a lot (City of Gold Coast ePlan)
- City Plan 9.4.8 Reconfiguring a lot code (City of Gold Coast ePlan)
- City Plan Appendix 2, Table of amendments (City of Gold Coast ePlan)
- City Plan amendments (City of Gold Coast)
- Planning our city (City of Gold Coast)
- Superseded and historic versions of City Plan available within ePlan (City of Gold Coast Planning and Development Hub)
- City of Gold Coast Planning and Development Hub
- New Planning Scheme (City of Gold Coast)
- The Local Growth Management Strategy (GC Have Your Say, City of Gold Coast)
- Developing the new Planning Scheme (GC Have Your Say, City of Gold Coast)
- Mapping search (City of Gold Coast)
- Planning for bushfire (City of Gold Coast)
- Planning for landslide (City of Gold Coast)
- Planning for flood (City of Gold Coast)
- Buying or building in a flood risk area (City of Gold Coast)
- Flood level search (City of Gold Coast)
- Development on local heritage places (City of Gold Coast)
- How to lodge a development application (City of Gold Coast)
- Infrastructure works (City of Gold Coast)
- Connecting to the City's water and sewerage network (City of Gold Coast)
- Infrastructure charges (City of Gold Coast)
- Infrastructure charges resolution (City of Gold Coast)
- Planning (Prescribed Amounts) Amendment Regulation 2026 (Qld)
- Plan sealing (City of Gold Coast)
- Planning and development certificates (City of Gold Coast)
- FY2026/27 Fees (Queensland Titles Registry)
- Contact us (City of Gold Coast)
This guide is general information only, current at November 2026. Rules, fees and maps change, and every block is different. Speak to a licensed surveyor or town planner about your property.
